Upright Keezer with rigid-mounted picnic taps - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Upright Keezer with rigid-mounted picnic taps

Reply
 
Thread Tools
Old 04-05-2011, 05:30 PM   #1
-TH-
Recipes 
 
Oct 2008
Zeeland, Michigan
Posts: 902
Liked 90 Times on 53 Posts



I though I would share some pics of my upright keezer with rigid mounted picnic taps. I had searched for others who had done something similar with the taps but I couldn't find any so I figured I should post mine in case anyone else is looking.

I started the project by removing all the wire mesh shelves and then adding my own top shelf which is much sturdier than original. For temp control I bought and installed the Love controller which is a great piece of equipment btw. Next I added a cable track thing just because I had one laying around and it also does a great job of keeping the wires from knocking over stuff on the shelf. I wanted the 10# CO2 tank outside so I opted to drilled a hole in the bottom of the freezer for 3/8 OD PE tubing (I really like push-to-connect fittings if you haven't noticed already). The 4-port CO2 manifold is one that I made from a block of aluminum (2 ports are plugged for now). My beer lines are 1/4 OD (.177 ID) PE tubing. I cut the barbs off two picnic taps and then drilled and tapped them for 1/8 NPT. The fittings hold the taps firmly in place on the mounting bracket which is a small aluminum channel. I also added a small ss screw to keep them from rotating. The finished (for now) product works really well - much better than when the taps were just hanging inside. I plan on adding 2 more soon since the keezer holds 4 cornies. Someday I will probably replace them all with faucets and shanks but for now this setup meets my needs. What do you think?















__________________
TH

Builds, etc: E-Brewery | Pneumatic Bottle Capper | Fermentation Chamber | Stirplate | Bottle Cabinet
Water Spreadsheet: www.EZWaterCalculator.com

SoonerDoc Likes This 
Reply With Quote
Old 04-05-2011, 05:33 PM   #2
JetSmooth
Recipes 
 
Feb 2010
Baltimore, MD
Posts: 1,875
Liked 43 Times on 39 Posts


That's a pretty decent build. Why didn't you go with traditional shanks and faucets?

I would think the continual opening and closing might play havoc with the temperature.

Or do your pour into pitchers so I don't "go to the trough" repeatedly?


__________________
http://smokebubbles.wordpress.com - Brewin' and 'Quein' since last Tuesday.

Bottling the Belgian: A Photo Odyssey

Beer is the mind-killer. Beer is the little death that brings total obliteration. I will face my beer. I will permit it to pass over me and through me. And when it has gone past I will turn the inner eye to see it's path. When the beer has gone there will be nothing. Only I will remain.

 
Reply With Quote
Old 04-05-2011, 06:39 PM   #3
erikpete18
Recipes 
 
Apr 2009
Seattle, WA
Posts: 829
Liked 32 Times on 30 Posts


That's a heck of an idea! My biggest pain with the picnic taps was that even when I had them coiled up nicely they would tend to fall down or flop all over the place so I quickly upgraded to a couple of faucets through the door. This would be a lot nicer than free taps, and for just the cost of metal tap holder. Puts off having to buy the faucets and shanks for a little while, at least until you get tired of opening the door .

 
Reply With Quote
Old 04-05-2011, 08:09 PM   #4
brettwasbtd
Awesomeness Award Winnner
HBT_LIFETIMESUPPORTER.png
 
brettwasbtd's Avatar
Recipes 
 
Apr 2010
Damascus, MD
Posts: 1,801
Liked 161 Times on 117 Posts


only the last picture is showing for me...

 
Reply With Quote
Old 04-05-2011, 11:18 PM   #5
Antler
Recipes 
 
Mar 2011
Carbonear, Nl
Posts: 711
Liked 19 Times on 17 Posts


I was looking for something like this! This is pretty close to what I have in mind for my future build, but my stand-up will be built into a small bar, lines coming out the side into a double tap tower a foot or two away. Great job!

 
Reply With Quote
Old 04-28-2011, 02:09 AM   #6
jaynik
Recipes 
 
Feb 2009
Arnold, Maryland
Posts: 404
Liked 31 Times on 15 Posts


So, is the motivation for the rigid picnic taps specifically to save money to be able to buy stainless taps, etc? I thought of starting with picnic taps to make sure I want to keg before I drill any holes...

 
Reply With Quote
Old 04-28-2011, 05:23 AM   #7
JoshuaWhite5522
HBT_LIFETIMESUPPORTER.png
 
JoshuaWhite5522's Avatar
Recipes 
 
Jan 2009
Puyallup, WA
Posts: 630
Liked 18 Times on 14 Posts


Quote:
Originally Posted by jaynik View Post
So, is the motivation for the rigid picnic taps specifically to save money to be able to buy stainless taps, etc? I thought of starting with picnic taps to make sure I want to keg before I drill any holes...
you are going to save yourself about 50 per (depending on where you shop) if you use the picnic tap over a faucet. Let me tell you though, after you keg just once you will never want to bottle again.
__________________
The problem with the world is that everyone is a few drinks behind
- Humphrey Bogart

My Keezer Build

My Kegbot Over 1000 pints poured!

 
Reply With Quote
Old 04-28-2011, 12:45 PM   #8
-TH-
Recipes 
 
Oct 2008
Zeeland, Michigan
Posts: 902
Liked 90 Times on 53 Posts


Quote:
Originally Posted by jaynik View Post
So, is the motivation for the rigid picnic taps specifically to save money to be able to buy stainless taps, etc? I thought of starting with picnic taps to make sure I want to keg before I drill any holes...
Bingo!

I would love to have faucets but yeah I need to save a little money first. This set up works great for the time being however.

BUt if you have the money and are only hesitant because you think you won't like kegging, well, I haven't seen anyone here regret the move yet.
__________________
TH

Builds, etc: E-Brewery | Pneumatic Bottle Capper | Fermentation Chamber | Stirplate | Bottle Cabinet
Water Spreadsheet: www.EZWaterCalculator.com

 
Reply With Quote
Old 04-28-2011, 03:21 PM   #9
GatorDad
Recipes 
 
Mar 2011
Brandon, Florida
Posts: 229
Liked 5 Times on 4 Posts


First: NICE effing build.

and... if you store your keezer in the garage, and you live in Florida, there are bugs that crawl around in the night. Sorry, I can't deal with the thought of that, so, all my taps are inside - and it's going to stay that way.


Quote:
Originally Posted by -TH- View Post
Bingo!

I would love to have faucets but yeah I need to save a little money first. This set up works great for the time being however.

BUt if you have the money and are only hesitant because you think you won't like kegging, well, I haven't seen anyone here regret the move yet.

 
Reply With Quote
Old 04-28-2011, 06:58 PM   #10
-TH-
Recipes 
 
Oct 2008
Zeeland, Michigan
Posts: 902
Liked 90 Times on 53 Posts


Quote:
Originally Posted by GatorDad View Post
First: NICE effing build.

and... if you store your keezer in the garage, and you live in Florida, there are bugs that crawl around in the night. Sorry, I can't deal with the thought of that, so, all my taps are inside - and it's going to stay that way.
Do you have pictures? of the inside taps that is - not the bugs


__________________
TH

Builds, etc: E-Brewery | Pneumatic Bottle Capper | Fermentation Chamber | Stirplate | Bottle Cabinet
Water Spreadsheet: www.EZWaterCalculator.com

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
upright freeze has coils in the shelves, my keezer build justbrewit Kegerators & Keezers 15 06-26-2012 04:29 PM
going from keezer wall taps... Dgonza9 Kegerators & Keezers 10 08-31-2010 02:00 AM
Upright Keezer Help - Tried All The Tricks for Finding Coils, No Luck eljefe Kegerators & Keezers 8 07-13-2010 06:12 PM
Loose Shank on Upright Keezer Help Request AlchemyBrewing Kegerators & Keezers 4 06-21-2010 06:56 PM
Upright Keezer Idea wh4tig0t Kegerators & Keezers 1 11-24-2009 02:39 PM


Forum Jump