wort pump/camlock issue/question - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > wort pump/camlock issue/question

Thread Tools
Old 04-03-2011, 02:21 PM   #1
agroff383's Avatar
Mar 2009
Lancaster PA
Posts: 537
Liked 4 Times on 4 Posts

hey all, i bought a march pump with a straight outlet with a 3/4 npt male thread on it, does anyone make a camlock 1/2 on one side and a female on the other so i can use my quick disconnnect/hose assembly?

everything else i have found so far is 1/2 npt on one side and 1/2 camlock on the other. would i just have to get a reducer then put the 1/2 fitting on that?
Can I have your business card?

Reply With Quote
Old 04-03-2011, 03:07 PM   #2
Dec 2010
Chapel Hill, NC
Posts: 85

I used a female to female adapter for my march pump + quick disconnects.

Hope that helps.

Reply With Quote
Old 04-15-2011, 08:29 AM   #3
Nov 2009
, Washington
Posts: 10

I have the same pump and use this coupling with my 1/2" camlocks: http://www.bargainfittings.com/index...product_id=127

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Chugger pump issue JMichael Equipment/Sanitation 30 08-15-2011 01:34 PM
Dealing with camlock spills? Cpt_Kirks Equipment/Sanitation 11 12-07-2010 05:03 PM
Wort Transfer Pump Question Magnatron Equipment/Sanitation 3 09-06-2010 11:33 PM
Camlock Seal problem?? Fin-lander Equipment/Sanitation 16 08-15-2010 05:04 PM
Can I use this pump for wort? Cyan Equipment/Sanitation 5 01-08-2010 03:16 AM

Forum Jump