Soda regulator question: technical - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Soda regulator question: technical

Reply
 
Thread Tools
Old 03-31-2011, 08:01 AM   #1
redalert
Registered User
Recipes 
 
Sep 2009
Linden, NJ
Posts: 352
Liked 1 Times on 1 Posts



Hi,
I have a technical question about a coke C02 dual regulator for a soda installation (bag in box). This is the regulator:

Are there any differences in the regulators despite the color and the larger "out" connector on the red regulator? I read both stickers on the regulators themselves. The grey regulator has a max psi rating of 65psig which I assume is for the soda syrup while the red regulator has a max psi of 105 psig which I assume is for the carbonator. Now let's say I hook them up backwards and put the syrup to the 105 psig (red) regulator and vice versa what will happen? Will the 65 max psig regulator just let in pressure to 65 Psig then stop or back purge or will it go above? Can anyone tell me if there's an actual difference in the regulators? Is it safe to operate the 65 psig regulator with pressure exceeding 100 psig? Also can anyone tell me what purpose these 2 screws serve? Thanks.

 
Reply With Quote
Old 03-31-2011, 12:01 PM   #2
onthekeg
Recipes 
 
Feb 2009
Posts: 1,786
Liked 83 Times on 65 Posts


I really have no idea on that one. Hey, open up the paper in the picture and see if it helps out! It doesn't appear that there are any check valves on them so don't hook them up backwards.

 
Reply With Quote
Old 03-31-2011, 12:17 PM   #3
carrotmalt
Recipes 
 
Oct 2008
.
Posts: 477
Liked 8 Times on 7 Posts


Quote:
Originally Posted by redalert View Post
Also can anyone tell me what purpose these 2 screws serve?
I'm guessing they're for pressure relief. When you turn the pressure gauge down, it probably bleeds off pressure there to the new setting.
__________________
I like a little more beer in my beer.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer/Regulator Question garcara Kegerators & Keezers 5 06-04-2012 06:33 PM
Welding Questions (Technical) bkloos Brew Stands 53 01-29-2010 04:58 PM
Regulator Set-up for Soda and beer brewjack Kegerators & Keezers 6 08-29-2009 12:14 PM
Sciplus Regulator question for keezer bushump Kegerators & Keezers 6 07-03-2008 08:02 PM
Soda Gun - Anyone used one of these? Atl300zx Kegerators & Keezers 9 08-08-2007 07:50 PM


Forum Jump