march pump mounting holes - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > march pump mounting holes

Reply
 
Thread Tools
Old 03-28-2011, 02:40 AM   #1
doctorsbro
Recipes 
 
Mar 2011
council bluffs, iowa
Posts: 174
Liked 2 Times on 2 Posts



Im currently building my bre stand and need some dimensions of the mounting holes for a march pump, im making the plates at work and dont have the pumps yet, i just need the dimensions from the center to center of the holes so i can makes these plates and weld them to the stand, any help would be greatly appreciated, thanks.

 
Reply With Quote
Old 03-28-2011, 10:37 AM   #2
Hammy71
Senior Member
HBT_SUPPORTER.png
 
Hammy71's Avatar
Recipes 
 
Sep 2008
, Maryland, The Tax Me State
Posts: 5,899
Liked 531 Times on 404 Posts


Front to back 2 3/8". Side to side 2 5/8". I used 1/4-20 bolts to attach mine. The holes are slotted side to side.

 
Reply With Quote
Old 03-28-2011, 11:09 AM   #3
doctorsbro
Recipes 
 
Mar 2011
council bluffs, iowa
Posts: 174
Liked 2 Times on 2 Posts


thanks i appreciate the help, i am going to punch these with .31" x ..44" obrounds with the longside going front to back so the plate will have adjustment front to back and the pump adjustment side to side.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
March pump set up kegtoe Brew Stands 5 05-31-2010 10:34 PM
March pump head mounting evandy Brew Stands 8 01-24-2010 09:16 PM
How to mount March Pump that has no Mounting Feet? cruelkix Brew Stands 23 12-20-2009 03:34 PM
March pump question madisoneyes DIY Projects 17 11-11-2009 05:28 PM
New March Pump passedpawn DIY Projects 12 09-27-2009 07:52 PM


Forum Jump