Quick and easy mash tun help!! - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Quick and easy mash tun help!!

Reply
 
Thread Tools
Old 02-28-2007, 12:56 AM   #1
jezter6
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Nov 2006
DARLINGTON, MARYLAND
Posts: 4,289
Liked 14 Times on 14 Posts



Ok, so with my purchase of some guys AG stuff, I got 2 coolers. A 10-gal mash tun with false bottom, and some 5-gal cooler with the spigot replaced by a bung with a 3/8" copper tube coming out of it...I assume it was used as an HLT and gravity fed the sparge arm...which I didn't seem to get in his stuff.

I can't get the false bottom out of my big tun, and I don't think it would fit the diameter of my little cooler anyways.

How can I make a quick and dirty mash tun out of it? I want to brew a few small 3 gallon test batches inside using my stovetop and 6 gal brewpot instead of braving the cold and firing up the turkey fryer for just this small batch. Should I bother firing up the big 10-gal mash tun for like...8# of grain?

How can I do this QUICK and simple...IE - run to home depot after work and pick something up that will just work within minutes?

Can I just get a wire braid hose and clamp the thing down onto the little tube? Should I go PVC and drill 20 quick small holes in the bastard?

What can I do? I'd like to brew tomorrow night if possible.
__________________
http://www.survivalsupplyhq.com

 
Reply With Quote
Old 02-28-2007, 01:25 AM   #2
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 96 Times on 81 Posts


Go to target, get a 9" SS vegetable steamer with the little holes in it for $4. Drill a hole and insert a 3/8" barb... tada, $6 SS false bottom in your 5 gallon tun. Expect near 80% eff.

Pol

 
Reply With Quote
Old 02-28-2007, 01:44 AM   #3
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 96 Times on 81 Posts


Look at these pics... there is one of the false bottom I am talking about.

http://s168.photobucket.com/albums/u189/PolTavern/

Pol

 
Reply With Quote
Old 02-28-2007, 02:06 AM   #4
jezter6
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Nov 2006
DARLINGTON, MARYLAND
Posts: 4,289
Liked 14 Times on 14 Posts


Interesting...I may give that a run if it turns out to be the best alternative. I'm hoping to prevent as much drilling/piecing together as possible, as I doubt I'll ever use this more than 3 or 4 times.

But it looks cool!
__________________
http://www.survivalsupplyhq.com

 
Reply With Quote
Old 02-28-2007, 02:08 AM   #5
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 96 Times on 81 Posts


Drill one hole, screw it in (or press in a nylon barb) and you are ready to go. Used mine for a year, I was very happy with it.

Pol

 
Reply With Quote
Old 02-28-2007, 06:39 PM   #6
jezter6
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Nov 2006
DARLINGTON, MARYLAND
Posts: 4,289
Liked 14 Times on 14 Posts


I happened to find myself at home depot today anyways, so I bought a 12" piece of braided steel hose.

How easy is it to cut the ends off and pull out the rubber inside? I'd like to get this thing done in like 20 minutes if possible....I want to brew tonight.
__________________
http://www.survivalsupplyhq.com

 
Reply With Quote
Old 02-28-2007, 06:48 PM   #7
Yeast Infection
Recipes 
 
Feb 2007
Boulder, CO
Posts: 204

Its pretty easy to cut the braided hose, I made a knick in the metal mesh with a hack- saw and then cut through the entire thing with a pair of heavy duty searated scissors. Once it is cut, push the mesh off the rubber hose with a pair of plyers, do not try to pull it off, its like a chinese finger trap.

You could also use a Dremel to cut trough it.

 
Reply With Quote
Old 02-28-2007, 08:05 PM   #8
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
 
Lil' Sparky's Avatar
Recipes 
 
Feb 2006
Honolulu, HI
Posts: 3,959
Liked 72 Times on 46 Posts


Just use the 10 gallon cooler if it's already set up. 8# of grain would be fine. That's what I'd do, instead of modifying/building something else. Just my $0.02.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My quick, easy, free bottle dryer spitfire DIY Projects 33 08-31-2014 04:32 PM
Cheap, Easy, Quick DIY Carboy Carrier SowegaBrews Fermenters 7 04-06-2013 01:00 AM
Quick and Easy Chicken (With Beer) thedigitale Cooking & Pairing 2 06-25-2009 06:30 PM
Quick and Easy Brewery Items jayhuff General Chit Chat 0 09-07-2008 07:00 PM
Quick/Easy BarleyCrusher question Soulive Equipment/Sanitation 10 01-08-2008 03:00 PM


Forum Jump