BIAB Brewing (with pics) - Page 91 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > BIAB Brewing > BIAB Brewing (with pics)

Reply
 
Thread Tools
Old 09-18-2012, 05:01 PM   #901
Mysticmead
 
Mysticmead's Avatar
Recipes 
 
Jan 2010
Kingston, GA
Posts: 1,342
Liked 92 Times on 62 Posts


Quote:
Originally Posted by MMJfan View Post
I have another BIAB question. I generally use kits for brewing and I have been doing all extract kits up until my last brew which was my first BIAB. But that was a recipe I found on the interweb. I was wondering if I could just order the AG kits from places like NB and brew them using the BIAB method?
yep... BIAB is just another method of AG brewing. no different than a person that fly sparges, no different than a batch sparger.. Of course, as with ANY method of All Grain brewing, you will need to learn your setup and learn what YOU need to adjust for the process and recipe.

MMJfan Likes This 
Reply With Quote
Old 09-18-2012, 05:17 PM   #902
thughes
HBT_SUPPORTER.png
Recipes 
 
Jan 2010
Rochester
Posts: 701
Liked 52 Times on 49 Posts


Yes. BIAB is AG brewing therefore any AG kit will work with any method of AG brewing.
__________________
nurture my pig

MMJfan Likes This 
Reply With Quote
Old 09-18-2012, 05:20 PM   #903
MMJfan
Recipes 
 
May 2012
Wooster, OH, Ohio
Posts: 824
Liked 68 Times on 55 Posts


Very good. That's what I figured, but I just wanted to make sure. Thanks guys!

 
Reply With Quote
Old 09-18-2012, 05:20 PM   #904
weeple2000
Recipes 
 
Oct 2010
Madison, WI
Posts: 125
Liked 2 Times on 2 Posts


Will mash efficiency improve if I use something longer to stir? Like maybe a 5 gallon paint bucket stick? I have been using a large spoon that is slotted. How much should I be stirring?

 
Reply With Quote
Old 09-18-2012, 05:37 PM   #905
Mysticmead
 
Mysticmead's Avatar
Recipes 
 
Jan 2010
Kingston, GA
Posts: 1,342
Liked 92 Times on 62 Posts


Quote:
Originally Posted by weeple2000 View Post
Will mash efficiency improve if I use something longer to stir? Like maybe a 5 gallon paint bucket stick? I have been using a large spoon that is slotted. How much should I be stirring?
everyone has their opinions on stirring and all I can really tell you is to do what works best for you. For me, I stir when I dough in and I stir when raising the heat to mash out after a 90 minute mash. that's it. I get 75-80% efficiency doing it this way with my average sitting at 77%. I also don't adjust the heat during the mash (except when doing a decoction mash) any other time besides mash out. it's what works for ME.

Once you find what works for you, stick with it. Even if someone tells you that you're doing it wrong. if it makes great beer it can't be wrong.

 
Reply With Quote
Old 09-18-2012, 05:37 PM   #906
jmd1971
Recipes 
 
Feb 2012
Weymouth, MA
Posts: 134
Liked 7 Times on 7 Posts


I'd recommend a large paddle but depends on the size of the vessel. As long as you can stir well to break up clumps, evenly distribute the temp, etc it shouldn't matter. Personally, I stir every 20 mins & check the temp in case I have to add any heat but its not mandatory. Recommended though...

 
Reply With Quote
Old 09-18-2012, 05:39 PM   #907
jmd1971
Recipes 
 
Feb 2012
Weymouth, MA
Posts: 134
Liked 7 Times on 7 Posts


Amen to MysticMead! Go with what works for YOU regardless of whether others disagree. As long as you are happy with the end result, that's all that should matter.

 
Reply With Quote
Old 09-19-2012, 04:57 AM   #908
weeple2000
Recipes 
 
Oct 2010
Madison, WI
Posts: 125
Liked 2 Times on 2 Posts


I just thought I should ask. I have done 2 batches of BIAB for my all grain attempts thus far. The first batch was a SMASH IPA, and I didn't record how many lbs of grain I milled, so I am not positive what my efficiency was. The second time I did the same as the first, full volume BIAB no sparge, but forgot to raise the temp to 170 for mash out. My efficiency using the calculator online the second time was 57%, which seems very low. I am just getting into this, and I think improvements will still be made to my process. I am using the mill at my LHBS and I suspect I may be getting lower efficiency because of that, but still, lower than 60% seems very low. I sqeezed the bag what I thought was a decent amount. I'm not sure if I could've gotten anything else out of it.

I mashed 16 lbs of grain, so I suspect that part of the efficiency lost may be due to the larger grain bill. I also read that mashing out at 170 doesn't effect efficiency that much. From another poster's advice in my personal thread, I am reading this thread. However, I am only on page 10 or so of the 90+ pages, so if there is anything important past that it will be a couple weeks before I get to it.

Also, the first time I did this I milled my grain twice. The second time (when I did 16 lbs) I only milled once. So it is possible a lower efficiency is due to this as well.

 
Reply With Quote
Old 09-19-2012, 10:29 AM   #909
jmd1971
Recipes 
 
Feb 2012
Weymouth, MA
Posts: 134
Liked 7 Times on 7 Posts


Probably a combination of only milling once & the larger grain bill is the culprit. With a double crush & grain bills around 11-12#, I've consistently gotten efficiencies in the 80's - some in the low '90's! However, when the grain bill gets higher, my efficiency dropped down into the high '60's-low '70's. For higher grain bills, you probably want to do a sparge on the side & add back to the kettle...

 
Reply With Quote
Old 09-19-2012, 10:04 PM   #910
Fastmetal
HBT_SUPPORTER.png
 
Fastmetal's Avatar
Recipes 
 
Jan 2011
Lee Summit, MO
Posts: 280
Liked 11 Times on 9 Posts


Quote:
Originally Posted by MMJfan
I have another BIAB question. I generally use kits for brewing and I have been doing all extract kits up until my last brew which was my first BIAB. But that was a recipe I found on the interweb. I was wondering if I could just order the AG kits from places like NB and brew them using the BIAB method?
Yup.
__________________
Kegs- :-(
Primary- :-(

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Another first BIAB stunsm BIAB Brewing 12 03-17-2013 09:35 PM
Anyone BIAB? ultravista All Grain & Partial Mash Brewing 72 08-31-2012 12:50 AM
1st AG, 1st BIAB results w/ pics mattmcl All Grain & Partial Mash Brewing 4 09-13-2011 01:48 AM
A nice Podcast on BIAB from one of the Pioneers of BIAB gunner65 All Grain & Partial Mash Brewing 0 02-26-2011 01:24 AM
Brew day - brewing a duvel clone! (pics attached) Steve973 All Grain & Partial Mash Brewing 2 01-22-2007 02:29 PM


Forum Jump