Push boxes and maximum bends in NMC - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Push boxes and maximum bends in NMC
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Thread Tools
Old 03-16-2011, 03:30 PM   #1
Feb 2010
Lincoln, United Kingdom
Posts: 940
Liked 33 Times on 23 Posts

Another electricity question from me... bear with me. I've been reading the NEC and it says that there cannot be more than 4 (90 degree) bends in the conduit between box to box. I read that as meaning outlet box to outlet box. However, would putting push boxes in the conduit mean I could do more bends and still keep it in code?

I have this really pesky situation that would require no less than 6 bends from outlet to outlet.

BTW, invariably some people have the attitude that if you need to ask a question about electricity and or codes than you shouldn't be doing it. Without derailing a thread before it starts, I disagree.

Reply With Quote
Old 03-16-2011, 07:15 PM   #2
Senior Member
Hammy71's Avatar
Sep 2008
, Maryland, The Tax Me State
Posts: 5,863
Liked 520 Times on 395 Posts

Yes, you can add condulet bodies or pull boxes between your outlets. A pulling 'c' or 'LB' type fitting is appropriate way to get around the bending radius codes.
Click image for larger version

Name:	140.jpg
Views:	81
Size:	2.2 KB
ID:	21884  

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick push button wiring question captain_vood DIY Projects 28 09-19-2013 05:51 PM
Push to connect fitting WIPbrewery Kettles, Mash Tuns & Hot Liquor Tanks 6 06-13-2010 02:58 AM
Banjo burners can they be lit from push button grill ignitors? nicknoty Brew Stands 6 02-28-2010 07:13 PM
wort chiller "bends" Nickeldeposit Chillers & Stir Plates 22 02-18-2010 12:07 AM
Keg Boxes Monster Mash Kegerators & Keezers 4 04-25-2007 08:11 PM

Forum Jump