Moving to All Grain! - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Moving to All Grain!
Cool Brewing Corny 5G & Mini Giveaway

Reply
 
Thread Tools
Old 03-09-2011, 03:49 PM   #1
Countrysquire
Recipes 
 
Join Date: Aug 2010
Location: League City, Texas
Posts: 66

I've done about a dozen partial mash batches and have had great success thanks to the members of this forum. Have been reading about all grain brewing and have decided to make the move.

So far, I've picked up 3 Sanke kegs from a guy off craigslist for $100 and will now work towards converting them to a HLT, MLT, & BK. My plan is to initially use gravity and the two propane burners that I have at my outdoor kitchen, but eventually build a stand & move to electric heating elements, HERMS, etc.

It looks like the retrofits to the Sankes for electric heat will be easy enough, but things are rarely as easy as I think they should be. Any advice on making this future proof? What would you've done differently?

Thanks, as always I appreciate the great advice which leads to great beer.



 
Reply With Quote
Old 03-09-2011, 11:00 PM   #2
DarkNoonBrewer
Recipes 
 
Join Date: Jun 2010
Location: Lafayette, IN
Posts: 187
Liked 7 Times on 5 Posts
Likes Given: 5


Make sure the ring on the bottom of each keg isn't sealed and that they have holes in them to keep them from exploding with heat.


__________________
Quote:
Cover me, I'm doughin' in!
-Ralph Tillotson

 
Reply With Quote
Old 03-10-2011, 12:40 PM   #3
Countrysquire
Recipes 
 
Join Date: Aug 2010
Location: League City, Texas
Posts: 66

Thanks. I did check and all three have drain holes.

 
Reply With Quote
Old 03-10-2011, 12:54 PM   #4
fujieagle
HBT_SUPPORTER.png
 
fujieagle's Avatar
Recipes 
 
Join Date: Aug 2009
Location: usa
Posts: 207
Liked 16 Times on 12 Posts
Likes Given: 18


Congrats on the all grain adventure. The only suggestion I have would be to buy your thermometers all at once if buying them from EBAY. I didn't and now I'm having trouble finding one to match what I have already. Doesn't really matter as long as they work but I like all of my stuff to match. The other advice, take the time to really consider what you want when you get ready to build your stand.

 
Reply With Quote
Old 03-10-2011, 01:02 PM   #5
Countrysquire
Recipes 
 
Join Date: Aug 2010
Location: League City, Texas
Posts: 66

Thanks. I think that it will probably be best to do a few brews with what I have before I finalize a design for the stand.



 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving to all grain tech413 All Grain & Partial Mash Brewing 11 09-10-2010 03:20 PM
Moving into All-grain Troxs All Grain & Partial Mash Brewing 0 02-06-2010 11:29 PM
Moving to all grain question darkstar79 All Grain & Partial Mash Brewing 12 01-11-2010 07:48 PM
Moving Closer Towards All-Grain ahoffman565 All Grain & Partial Mash Brewing 4 10-31-2009 07:10 PM
Moving to all grain question bmelanco All Grain & Partial Mash Brewing 6 08-29-2008 02:30 AM


Forum Jump