30" braided stainless steel strainer - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > 30" braided stainless steel strainer

Thread Tools
Old 03-07-2011, 09:35 PM   #1
May 2008
Posts: 234
Liked 2 Times on 2 Posts

Hello ladies and gents,
Some quick question about upgrading my equipment... (link under)

Would this be a problem in mash tun?
Would it collapse under the grain weight?


Primary 1: Canadian Pale Ale
Primary 2: American Stout
Primary 3: Empty
Primary 4: Empty
Bottled: IPA,Belgian Wit, Pale ale,Stout, Sour beer.
Planning: Janets Brown, Northern German Alt, Arrogant bastard Clone+ more yummy beers
I only take a drink on two occasions - when I'm thirsty and when I'm not.
Brendan Behan
Drunken Lullabies Brewery

Reply With Quote
Old 03-07-2011, 09:38 PM   #2
kingmatt's Avatar
Mar 2010
Souderton, PA
Posts: 770
Liked 45 Times on 35 Posts

As long as it is braided stainless steel then it shouldn't collapse on you.

You could save yourself some money by DIY...
Fermenting: Rye IPA
Kegged: Munich Helles, Doppelbock, American Pale
BJCP Certified Judge
-=My Keezer Build=-

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
My Fortune for One 5/8" Stainless Steel Fender Washer! JimE All Grain & Partial Mash Brewing 95 02-07-2013 07:12 AM
Stainless Steel MLT vsiddhartha All Grain & Partial Mash Brewing 7 02-15-2011 08:54 PM
Stainless Braided hose issue BubbaK All Grain & Partial Mash Brewing 9 08-06-2009 10:30 PM
thinking of changing mash/lauter tun "strainer" Steve973 All Grain & Partial Mash Brewing 3 04-05-2006 07:40 PM
Removing pipe from stainless braided hose vtfan99 All Grain & Partial Mash Brewing 3 09-24-2005 03:57 PM

Forum Jump