pre-filling vs. topping off - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > pre-filling vs. topping off

Reply
 
Thread Tools
Old 03-06-2011, 09:20 PM   #1
jwic
 
jwic's Avatar
Recipes 
 
Dec 2010
Chicago, IL
Posts: 125


I thought I had read somewhere that one can add water - sterile, of course - to a sanitized carboy and then top it with a sanitized piece of foil, the day before the brew so that it's ready to go for brew day (wort goes in and it's already at 5 gallons). Is this true?

Does anyone have a preference for pre-filling the carboy with a couple gallons of water vs. topping off with water after the wort goes into the carboy?

Also, Chicago tap water is very good. Is tap water okay to add (pre- or post-wort) or should I boil it to get rid of any unpleasant things which might harm the beer?

Cheers,
JWiC

 
Reply With Quote
Old 03-06-2011, 09:28 PM   #2
iron_city_ap
Recipes 
 
Oct 2009
Valparaiso, Indiana
Posts: 808
Liked 10 Times on 9 Posts


I'd still boil the water.

You can add the water before you add your wort, but you are running the risk of dilluting your wort down too much, but you can definately do it. You could even chill that water and use it to help cool your wort down. Ultimately I think its better to top off.

 
Reply With Quote
Old 03-06-2011, 09:32 PM   #3
unionrdr
Heavyweight homebrewing author & air gun shooter
HBT_LIFETIMESUPPORTER.png
 
unionrdr's Avatar
Recipes 
 
Feb 2011
Sheffield, Ohio
Posts: 38,988
Liked 3706 Times on 3178 Posts


Some of us make starters for the yeast that are covered with sanitized tin foil. But the fermenter? You might be miss-remembering. I've done that a couple times.
But I have put some spring water in the FV before pouring in the wort from as high up as I can to aerate it. Then top off to level with more spring water in the same manner. Tap water is ok if you don't have a lot of chlorine & such in it. I do,so spring water boiling brew kettle water is what I do.
Either way you add the water to the wort,just be sure you get the right amount & you should be fine. My 2c...
__________________
NEW books on amazon/Kindle! Check it out now...
Home Brewing- https://www.amazon.com/dp/B00PBAP6JO
Distopian Sci-Fi- https://www.amazon.com/dp/B00NTA0L6G
New! John Henry- https://www.amazon.com/dp/B01GBV3UXU

 
Reply With Quote
Old 03-06-2011, 09:33 PM   #4
Bensiff
 
Bensiff's Avatar
Recipes 
 
Mar 2008
, Washington, the state
Posts: 4,939
Liked 398 Times on 316 Posts


Nothing wrong with having water ready a day ahead. I would add water to the wort instead of add wort to the water. If you miss calculate your water needs you can't take it out once you start blending. By adding wort and then topping off with water you can slowly add the water until you hit your intended OG without worry of over dilution. Just make sure to mix well before taking a reading.

 
Reply With Quote
Old 03-06-2011, 09:37 PM   #5
jwic
 
jwic's Avatar
Recipes 
 
Dec 2010
Chicago, IL
Posts: 125

Thanks! You're right, I just made a starter this morning and I put foil on the top. I though for some reason, though, I had read a post about sanitizing a carboy the day before brew day and pre-filling it so that all one must do on brew day is brew and then add the chilled wort to the pre-filled/pre-sanitized carboy... I will avoid doing that, however, and chalk it up to a mis-remembering...

Another question but still related.

Both replies at least hint at having the right amount of water. I thought that the total volume should equal 5 gallons. Am I wrong? 2.5 of top-off water + 2.5 partial boil = 5 gallons? Or is this another time for the hydrometer? Does the amount of water I add depend on the gravity of the wort+water in the fermenter?

 
Reply With Quote
Old 03-06-2011, 09:59 PM   #6
iron_city_ap
Recipes 
 
Oct 2009
Valparaiso, Indiana
Posts: 808
Liked 10 Times on 9 Posts


That's kind of up to you. You definately should aim for 5 gallons if the recipe is designed to give you 5 gallons. You could just ferment your wort without topping off, but you will end up with a stronger and probably maltier version of what you set out to make. AND, you'll only have 2.5 gallons of it. TRY to boil down to about 2.5 gallons then top off to finish with 5. You may have 2.4 gallons of wort and top off with 2.6, etc.... If you are doing extract batches, aim for 5 gallons in the end and you'll be real close to your target. If you start doing all grain and full boils, it gets easier to 'mess up'.

 
Reply With Quote
Old 03-06-2011, 10:03 PM   #7
unionrdr
Heavyweight homebrewing author & air gun shooter
HBT_LIFETIMESUPPORTER.png
 
unionrdr's Avatar
Recipes 
 
Feb 2011
Sheffield, Ohio
Posts: 38,988
Liked 3706 Times on 3178 Posts


If you're using calculations like beersmith to get recipes just right before even buyin ingredients,yes. But it's beer,not rocket science. I just think some folks love the technical aspects of it. I think good beer can be made as much from experience as mathematical wizardry.
It also depends on how many gallons are intended for the recipe. & the hydrometer sample is drawn when the wort is mixed thoroughly to level & at the proper ferment temp. But before the yeast pitch.
__________________
NEW books on amazon/Kindle! Check it out now...
Home Brewing- https://www.amazon.com/dp/B00PBAP6JO
Distopian Sci-Fi- https://www.amazon.com/dp/B00NTA0L6G
New! John Henry- https://www.amazon.com/dp/B01GBV3UXU

 
Reply With Quote
Old 03-06-2011, 10:13 PM   #8
Special Hops
Recipes 
 
Jun 2008
Kanatenah
Posts: 1,437
Liked 24 Times on 22 Posts


Brewed extract for years and top off water always came straight from the tap. Never boiled it.
__________________
KANATENAH BREWERY
On Tap:Foreign Extra Stout, ESB
Fermenting: Fools Gold IIPA
Up Next: Oatmeal Stout

 
Reply With Quote
Old 03-06-2011, 10:19 PM   #9
unionrdr
Heavyweight homebrewing author & air gun shooter
HBT_LIFETIMESUPPORTER.png
 
unionrdr's Avatar
Recipes 
 
Feb 2011
Sheffield, Ohio
Posts: 38,988
Liked 3706 Times on 3178 Posts


Quote:
Originally Posted by Special Hops View Post
Brewed extract for years and top off water always came straight from the tap. Never boiled it.
Lucky you! we get too many chemicals here,& I'm only a couple miles from the shore of Lake Erie. And in a newer home. Thus the spring water. Works way better,no more off flavors from chloramines,etc.
__________________
NEW books on amazon/Kindle! Check it out now...
Home Brewing- https://www.amazon.com/dp/B00PBAP6JO
Distopian Sci-Fi- https://www.amazon.com/dp/B00NTA0L6G
New! John Henry- https://www.amazon.com/dp/B01GBV3UXU

 
Reply With Quote
Old 03-06-2011, 10:28 PM   #10
jwic
 
jwic's Avatar
Recipes 
 
Dec 2010
Chicago, IL
Posts: 125

Yeah, Chicago has pretty good drinking water. What's odd, though, is that water from my kitchen faucet smells very chemically (chlorine?) but water from my bathroom tap just steps away smells "normal."

Thank you, guys, for all the replies; and quickly at that!

I would say I'm in the category of homebrewer who likes to be pretty exact and know the science behind the brewing. On the other hand, if I get pretty close to what I'm going for without being perfectly exact, I'll live. Should still be potable and enjoyable!

Thanks, again!

Cheers,
JWiC

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Should I be topping up? osagedr Beginners Beer Brewing Forum 3 09-25-2009 02:18 PM
Topping Off milbob Beginners Beer Brewing Forum 9 06-01-2009 06:39 PM
Considering topping up..... hcarter Beginners Beer Brewing Forum 9 11-24-2008 05:39 PM
Topping off... rockout Beginners Beer Brewing Forum 16 06-11-2007 04:01 PM
Topping off mot Beginners Beer Brewing Forum 4 03-19-2007 09:41 PM


Forum Jump