Speidel Braumeister (brewmaster) - Page 177 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Speidel Braumeister (brewmaster)

Reply
 
Thread Tools
Old 11-12-2012, 07:23 AM   #1761
brewbush
HBT_SUPPORTER.png
Recipes 
 
Jan 2012
Middletown, MD
Posts: 113
Liked 6 Times on 6 Posts


Quote:
Originally Posted by dinnerstick View Post
i agree, from my experience you can get 7kg in the 20L and get into the 1.070's pretty easily, even with a 60 minute boil, if you are a bit careful with the mash. that said, i am not at all against using a bit of DME to boost gravity a bit or fine tune a batch, it's a useful tool in the toolbox, i get upset when people berate its use! but i wouldn't be afraid to go higher on the base malt and cut down the dme if i were you; 6kg is easy to mash (your 11 lbs grain bill = 5 kg). i have had a couple batches with >7kg grain bills get a bit stuck so i am a little cautious now when i load it up, but i have been having great results lately, with efficiency around 73-75%. i now always open the machine and stir the mash a few times at pump breaks, and sometimes can see that it's getting a bit glumpy or starting to channel, especially when i use a lot of wheat or oats. don't be afraid of a longer mash, i sometimes do a 90 minute rest at sacc temp, and i generally don't add specialty grains until the end of the mash (15-20 minutes left at sacc temp), save the space at the beginning for stuff that needs to be mashed. check the temp at the top of the malt tube often, especially just after temp changes, to make sure there is good flow through the grain; if the wort isn't circulating well you will have warmer wort outside the tube and cooler wort inside, of course a few degrees difference is expected, but if this happens it's time to give it a good stir.
Is my technique of adding the DME and substituting it for the base malt at the 20-30 min boil mark correct then? Just for future reference if I need to reduce the grain amount?

Thanks for the info on the weight amounts for the 20L, trying to avoid any issues.

 
Reply With Quote
Old 11-12-2012, 07:25 AM   #1762
Obliviousbrew
 
Obliviousbrew's Avatar
Recipes 
 
Feb 2012
Benidorm, Alicante/Spain
Posts: 1,567
Liked 230 Times on 161 Posts


I agree with the DME comment dinnerstick, I see no reason not use it if needed, I´m a cheap bastard and DME is expensive so I try not to use it but I see no problems doing it to get to your target OG. Saving your specialty malts for later in the mash is a great idea too. The unit keeps temps pretty steady with the insulating jacket and lid on during mashing. I too stir my mash during pump breaks and IMHO it does boost your gravity a few points.

 
Reply With Quote
Old 11-12-2012, 07:27 AM   #1763
dinnerstick
 
dinnerstick's Avatar
Recipes 
 
Nov 2010
utrecht, netherlands
Posts: 2,019
Liked 271 Times on 198 Posts


Quote:
Originally Posted by brewbush View Post
Is my technique of adding the DME and substituting it for the base malt at the 20-30 min boil mark correct then?
yes, i give it even less time in the boil; i throw in irish moss, yeast nutrients, and put in my immersion chiller all around the 15-10 minute mark, so i also add any sugars and dme then

 
Reply With Quote
Old 11-12-2012, 08:07 AM   #1764
danibier
Recipes 
 
May 2012
Bern, Switzerland
Posts: 9
Liked 2 Times on 2 Posts


Quote:
Originally Posted by bcryan View Post
Anyone have any experience with the 200 or 500 liter braumeister??
Hi, I am an experienced BM 200 l brewer. By using 48 kg of malt and 4 kg of sugar I get more than 320 l of beer wort around 11 °P. So, the BM 200 can easily be driven as a 300 l device. I can recommend it.

Check out my page if interested:

http://de-de.facebook.com/pages/dani...76739955731354

www.danibier.ch

on this German forum you will find a lot of information regarding the BM 200 l - use google translate.

http://hobbybrauer.de/modules.php?na...&orderdate=ASC


There is yet no official 500 l BM as far as I know. But, I saw the link. It seems to me they want to show the BM 500 to the world on the BrauBeviale in Nürnberg that starts tomorrow. The price seems quite high for the 500 l version. Production will start soon, I assume.

Best regards from Switzerland, Daniel

Alchemy Likes This 
Reply With Quote
Old 11-12-2012, 02:42 PM   #1765
psehorne
Recipes 
 
Nov 2012
Hidden Valley Airpark, Shady Shores, Texas
Posts: 65
Liked 3 Times on 3 Posts


Quote:
Originally Posted by psehorne View Post
My 29L has made it as far as Memphis!
My 20L is here in the metroplex. Should be delivered to me tomorrow. I'll post pics of the unpacking. I'm going to run a simulated brew with water only and short rests of about 5 minutes(probably on Wednesday) just to test everything out. I'll post pics of that also. Hopefully I will be brewing my first batch on Thursday (simple American Blonde Ale first up). I'll post pics of brew day also.

I've invited my Son-in-law over on Saturday to brew his LME extract Northern England stye Brown Ale as all-grain. Then on Sunday I plan on brewing an American Brown Ale. These will get the pipeline started.

In the meantime, here are some pics of my 20L's new home:

The first pic is my brew house (actually our pool-side kitchen). When weather permits I will place the 20L on a table just under the chalkboard on the right. The 240 volt electrical outlet is out of sight on the side of the building within easy reach just over the fence.

The second pic is of the 240 volt breaker box with a GFCI circuit breaker.

Then a close up of the GFCI breaker and the L6-20R receptacle, which as I already mentioned is just over the fence on the right side of the building.
Click image for larger version

Name:	BrewingStation.jpg
Views:	1115
Size:	60.2 KB
ID:	83592   Click image for larger version

Name:	BreakerBoxOpen.jpg
Views:	962
Size:	28.4 KB
ID:	83593   Click image for larger version

Name:	240V-GFCI.jpg
Views:	1000
Size:	22.1 KB
ID:	83594   Click image for larger version

Name:	ElectricalOutlet2.jpg
Views:	965
Size:	42.3 KB
ID:	83595  

Reason: spelling

 
Reply With Quote
Old 11-12-2012, 04:21 PM   #1766
psehorne
Recipes 
 
Nov 2012
Hidden Valley Airpark, Shady Shores, Texas
Posts: 65
Liked 3 Times on 3 Posts


Quote:
Originally Posted by psehorne View Post
My 29L has made it as far as Memphis!
FedEx tracking shows "On FedEx vehicle for delivery"

 
Reply With Quote
Old 11-12-2012, 07:17 PM   #1767
digitaldeluge
Recipes 
 
Dec 2010
Woodland Hills, CA
Posts: 26
Liked 3 Times on 3 Posts


Quote:
Originally Posted by psehorne View Post
FedEx tracking shows "On FedEx vehicle for delivery"
Nice, are you going to do a water test tonight?

That outlet looks really dangerous, you knocked out too many of the rings, you really should get another one.

 
Reply With Quote
Old 11-12-2012, 07:33 PM   #1768
psehorne
Recipes 
 
Nov 2012
Hidden Valley Airpark, Shady Shores, Texas
Posts: 65
Liked 3 Times on 3 Posts


Quote:
Originally Posted by digitaldeluge View Post
Nice, are you going to do a water test tonight?
I'm sure I won't be able to wait until tomorrow. Depends on how late it arrives today. Also, the temps this week are highs in the 60's, lows in the 30's with daylight temps ranging from about 45 (9AM) to mid 60's. So I will probably have to brew indoors. In which case, I will brew inside of the Blue Flamingo brew house and route the power cord out the window.


Quote:
Originally Posted by digitaldeluge View Post
That outlet looks really dangerous, you knocked out too many of the rings, you really should get another one.
I will be replacing the housing withing the next day or so (as soon as I make a trip to the hardware store). I originally had a larger, 4 conductor, 240 receptacle in there. That's why the opening has been knocked out too large for the L6-20R.

Reason: spelling

 
Reply With Quote
Old 11-12-2012, 07:45 PM   #1769
psehorne
Recipes 
 
Nov 2012
Hidden Valley Airpark, Shady Shores, Texas
Posts: 65
Liked 3 Times on 3 Posts


Quote:
Originally Posted by psehorne View Post
FedEx tracking shows "On FedEx vehicle for delivery"

It's here! The box is in really good shape (minor scar). So hopefully no damage. Now on to the un-boxing.
Click image for larger version

Name:	BraumeisterDelivery.jpg
Views:	972
Size:	54.9 KB
ID:	83628  

 
Reply With Quote
Old 11-12-2012, 10:54 PM   #1770
psehorne
Recipes 
 
Nov 2012
Hidden Valley Airpark, Shady Shores, Texas
Posts: 65
Liked 3 Times on 3 Posts


Quote:
Originally Posted by digitaldeluge View Post
That outlet looks really dangerous, you knocked out too many of the rings, you really should get another one.
How about now?
Click image for larger version

Name:	ElectricalOutlet4.jpg
Views:	992
Size:	44.1 KB
ID:	83656  

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
I met the Boulevard's Brewmaster Friday DannPM General Beer Discussion 1 02-02-2011 05:56 AM
braumeister noobster101 General Beer Discussion 22 06-03-2010 03:50 PM
#1 cool job: brewmaster Spunkmeyer General Beer Discussion 9 06-03-2008 03:50 AM
how to contact sierra nevada brewmaster grrtt78 General Beer Discussion 8 02-07-2007 06:19 PM


Forum Jump