Economical and correct receptacles-plugs for 240V 50A - Page 4 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Electric Brewing > Economical and correct receptacles-plugs for 240V 50A

Reply
 
Thread Tools
Old 03-02-2011, 04:08 PM   #31
clearwaterbrewer
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Aug 2010
Clearwater, FL
Posts: 266
Liked 11 Times on 10 Posts


Quote:
Originally Posted by burbelly View Post
For practically the same money, you might want to look at 6353EL-B inlet and 6364CRN cordset female connector plug. The inlet has an additional cover strain relief threads to take it off the connectors.
I plan on going in from the bottom, so strain relief should be not necessary...


I think I have it covered, ***Bernie approved***, and hopefully less than $200 for all.


These inlets for the underside of the control box were bought for $75 shipped for two (can clean up the other for 2nd box, or sell)


I hope to get this for less than $100.. 6ga :-)


and these are $8 each on Amazon, will get two, one for each brewing location. (will be mounted very close to main Panel, and with 6ga wire in conduit..)



Now we're cooking with electrons!



 
Reply With Quote
Old 03-02-2011, 04:13 PM   #32
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_ADMIN.png
 
passedpawn's Avatar
Recipes 
 
Apr 2009
☼ Clearwater, FL ☼
Posts: 25,650
Liked 6625 Times on 3914 Posts


Quote:
Originally Posted by clearwaterbrewer View Post
I think I have a more correct answer..
2 - there is no stinking difference!
That's what I thought.


__________________
- Andrew

 
Reply With Quote
Old 03-03-2011, 02:33 PM   #33
burbelly
Recipes 
 
Feb 2011
miami, fl
Posts: 56
Liked 1 Times on 1 Posts


This cable set is 6/3 8/1, is 36', and costs $75 shipped. It might fit the bill for you. http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT

 
Reply With Quote
Old 03-03-2011, 02:55 PM   #34
clearwaterbrewer
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Aug 2010
Clearwater, FL
Posts: 266
Liked 11 Times on 10 Posts


Thanks! That puts a comparison cost on the other one I hope to get that already has the california standard female connector on it! I know how much is too much to pay, and I like the length of this one!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
240V adapter cord? ExHempKnight Electric Brewing 16 02-24-2011 01:33 AM
240v Heatsticks: Love 'em or Hate 'em ? vballdrummer Electric Brewing 1 02-21-2011 06:30 PM
240V with no neutral? Can I build a rig? magnj Electric Brewing 98 02-10-2011 05:03 PM
Need help mounting receptacles in control panel Dgonza9 Electric Brewing 20 01-16-2011 02:19 PM
Strange issue with 240v legs. 120v on both, no 240v Brewmoor Electric Brewing 5 12-03-2010 07:15 PM


Forum Jump