controlling flow of march pump - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > controlling flow of march pump
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 02-23-2011, 01:48 AM   #1
THEDIETZ
Recipes 
 
Jul 2008
Harrisburg, PA
Posts: 196


I am doing my research on pumps as I am upgrading again. I have never had a pump and seems like March is the popular choice so I will more than likely go with the H315HF from morebeer unless i can get it cheaper somewhere else.

So before this my system was all gravity fed, so i would control the flow from my mashtun with my ball valve.

Now correct me if i am wrong but if i am using a march pump do I just put a ball valve after the pump and use it to control the flow? So i would open the ball valve on my mashtun the whole way and then use the ball valve after the pump for flow control?
I hope i made my question clear. Thanks for the help!!



 
Reply With Quote
Old 02-23-2011, 01:54 AM   #2
Catt22
Recipes 
 
Jan 2009
Posts: 4,998
Liked 68 Times on 61 Posts


Yes, although I prefer a gate valve on the outlet side of the pump for flow control.



 
Reply With Quote
Old 02-23-2011, 02:51 AM   #3
THEDIETZ
Recipes 
 
Jul 2008
Harrisburg, PA
Posts: 196

ok. Any suggestions on between 809 and H315 model??

 
Reply With Quote
Old 02-23-2011, 03:11 AM   #4
Catt22
Recipes 
 
Jan 2009
Posts: 4,998
Liked 68 Times on 61 Posts


Quote:
Originally Posted by THEDIETZ View Post
ok. Any suggestions on between 809 and H315 model??
I believe that they are one and the same. The 809 is the March number and the H315 is MoreBeer's designation. The H315 has been replaced with the H315HF. This is a slightly improved version of the same pump at the same price.

 
Reply With Quote
Old 02-23-2011, 02:16 PM   #5
mabrungard
HBT_LIFETIMESUPPORTER.png
 
mabrungard's Avatar
Recipes 
 
Feb 2011
Carmel, IN
Posts: 3,994
Liked 535 Times on 421 Posts


Controlling the pump flow with a valve on the outlet is recommended. Since this is a centrifugal pump, you can completely close the valve for long periods of time with the pump running and not have any damage. If you listen to the motor, you will hear the pump motor speed up as the valve is fully closed. This indicates that the load on the pump actually decreases. This is the same thing that happens when you put your hand over the nozzle on a vacuum cleaner, the speed goes up because the pump is not really doing anything except spin. Its not moving the fluid.
__________________
Martin B
Carmel, IN
BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook for occasional discussions on brewing water and Bru'n Water
https://www.facebook.com/pages/Brun-...?ref=bookmarks

 
Reply With Quote
Old 02-23-2011, 05:27 PM   #6
WalterAtMarchPump
HBT_LIFETIMESUPPORTER.png
 
WalterAtMarchPump's Avatar
Recipes 
 
Dec 2010
Glenview, IL
Posts: 670
Liked 51 Times on 39 Posts


The only difference between our standard 809's and the "beer" models is that the beer models have a plug on the end of the cord and have a mounting base. If you can wire up a plug and get creative with the mounting you can use the standard 809's...its all up to you as to how "plug and play" you want it.

-Walter



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Breast pump to replace march pump? instapman Equipment/Sanitation 69 03-21-2012 07:30 PM
Dual purpose March Pump as a Rain Barrel Pump nanotigerbrewer Equipment/Sanitation 6 12-01-2010 08:18 PM
March pump wont pump high temperatures. above 190... rshosted Equipment/Sanitation 17 07-12-2010 09:05 PM
March 809 HS pump flow rate Søren T Equipment/Sanitation 19 09-23-2008 11:13 PM
March pump technical info- material, temperature, flow rate, head Boerderij_Kabouter Equipment/Sanitation 1 07-17-2008 09:42 PM


Forum Jump