Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Building a bar - questions about protecting bar top - epoxy
Reply
 
Thread Tools
Old 02-17-2011, 03:04 PM   #1
scrapplejoe
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: swedesboro, nj
Posts: 3
Default Building a bar - questions about protecting bar top - epoxy

Hi,

I am in the process of building my bar, and I have a few questions..

First, I will be protecting it with a epoxy top... Ill probably be snagging the following :

http://store.creative-wholesale.com/...%2cProductName

Is that a good solution?

Next, I have a Chicago bar rail.... how should I protect that? Can I just paint on the above epoxy onto that or just but a seperate solution since its not a level surface?

Next, the rest of the bar....(front wall, side wall, etc)... What kind of coat should I put on that? Just a standard epoxy resin from Home Dept?


scrapplejoe is offline
 
Reply With Quote
Old 02-17-2011, 03:11 PM   #2
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
IrregularPulse's Avatar
Recipes 
 
Join Date: Nov 2007
Posts: 48,553
Liked 3174 Times on 3066 Posts
Likes Given: 169

Default

For the rail and wood (everything besides your top) just put a coat of polyurethane over the stain, or buy the stain/poly combo stuff.

__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas. :o - marubozo's mom
IrregularPulse is offline
 
Reply With Quote
Old 02-17-2011, 03:21 PM   #3
scrapplejoe
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: swedesboro, nj
Posts: 3
Default

Irregular...

thanks!

Also, next question..

My tower from my kegerator (summit dual tap) is currently attached to my kegerator... I want it to be about a foot from the kegerator (I want it on the bar top). Since its a short run, what is the best solution to run the lines through? Can you point me to a DIY or thread that shows what I need? Is it just a pvc pipe solution?>
scrapplejoe is offline
 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Building a motorized grain mill. Questions. Dukester Other 21 05-07-2014 07:29 PM
Noob rig building questions. Suggestions please! jtwangler Brew Stands 4 07-20-2010 05:31 AM
Building a HERMS set up: questions... spiny_norman Brew Stands 3 09-02-2009 03:30 PM
Questions on Building a Fermentation Chiller TheJadedDog Fermenters 5 03-15-2007 05:47 PM
Questions about building fermentation chiller? greg75 Fermenters 5 10-17-2006 05:31 PM


Forum Jump