Leaking gas, Nitro keg system - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Leaking gas, Nitro keg system

Reply
 
Thread Tools
Old 02-11-2011, 05:00 AM   #1
MooMan
Recipes 
 
Sep 2010
Denver, CO
Posts: 30


I tried to use my new nitro keg system I bought from Midwest tonight but ran into a problem. My gas was leaking upstream from the regulator. Am I missing a washer between the tank and the regulator? One was not included in the system and I tried screwing the regulator directly to the tank threads, but gas continued to leak through the threads.

Please help.

M

 
Reply With Quote
Old 02-11-2011, 09:54 PM   #2
BrewNinja1
Recipes 
 
Jan 2010
Cross Plains, WI
Posts: 326
Liked 5 Times on 5 Posts


Nitro regs should have an o-ring on the end of the regulartor that goes into the tank. Unlike CO2 regs which use a "washer" to seal it.

See this pic to get the idea: http://www.micromatic.com/draft-keg-...-pid-842N.html

 
Reply With Quote
Reply
Thread Tools



Forum Jump