Cream Ale (WLP080) Yeast Advice - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Cream Ale (WLP080) Yeast Advice

Thread Tools
Old 02-09-2011, 04:41 PM   #1
May 2010
Ashford, CT
Posts: 56

I'm going to be brewing the AHS Cream Ale kit (partial mash), with White Labs WLP080 Cream Ale Blend yeast sometimes in the beginning of March. Hoping to have it ready for a trip I'm taking in the middle of May. Seeing as this is an ale/lager blend and I've never lagered, I had a couple questions.

Is there anything I should do differently with this yeast, in regards to fermentation time/temp? I'm bottling, and my standard practice for ales is a month in primary, then bottle condition for 3+ weeks. Should that work OK for this one? I know the primary length is probably fine, but I didn't know if anyone else made this kit, and if the 3 weeks should be good enough in the bottle.

I have a freezer/temp controller set up, so I can tweak the temperature pretty accurately. Would keeping it steadily in the temp range for this yeast (65-70) be fine, or is there some increase/decrease in temp during different points in the primary that would make a better beer?

This yeast cleans up nicely, from what I've heard. Is cold crashing worth the extra time it might take to fully carb up the bottles? I left a couple extra weeks in my schedule to account for things like this.

I've had good luck with the batches I've made so far, but this will be the first one I'll be sharing with a bunch of strangers who probably won't humor me if it isn't good. Just wanted to make sure it's the best I can do, within the limits of my equipment.



Reply With Quote
Old 02-09-2011, 05:09 PM   #2

I've not used this yeast, hopefully someone with experience with it will chime in. When I brew a cream ale, I ferment it at low ale temps, around 60. While it may take the yeast a little longer to do its work at that temperature, it will likely give you a 'cleaner' result.

As for lagering bottle conditioned beer, one option is to lager the beer after its carbonated. I've done this with good results.

Reply With Quote
Old 02-09-2011, 06:45 PM   #3
Shinglejohn's Avatar
Jan 2009
Posts: 477
Liked 12 Times on 8 Posts

Ferment in the mid 60's to near completion, then lager for 4-6 weeks in primary before bottling. When your done lagering, slowly bring it back up to carbonation temps. A couple of degrees a day.

Reply With Quote
Old 02-10-2011, 01:05 AM   #4
Registered User
Jul 2008
Posts: 987
Liked 8 Times on 7 Posts

do low 60s, set the controller at 59 or 60F

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Advice on yeast to replace kit lazaah Fermentation & Yeast 9 12-29-2010 03:57 PM
Lager and Yeast Advice BigB Fermentation & Yeast 7 12-05-2010 07:12 PM
Yeast for Cream Ale (Coopers?) permo Fermentation & Yeast 1 05-20-2010 02:57 PM
Last minute brew...need yeast advice RDWHAHB Fermentation & Yeast 4 04-10-2010 10:41 PM
Lagering While Labs Cream Ale Yeast Blend mrgreen4242 Fermentation & Yeast 4 03-17-2010 01:11 PM

Forum Jump