Camlock question - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Camlock question

Thread Tools
Old 02-06-2011, 09:08 PM   #1
Mar 2010
Norfolk, VA
Posts: 208
Liked 4 Times on 4 Posts

Gonna go ahead a jump into the SS realm by adding qds to the brewkettle to plate chiller and after going thru all the pages of the camlock review thread, I have a questions on specific fixtures.

Is this the correct combo for the pot itself:

1X- 1/2" Camlock F

1X- 1/2" Camlock C

1X- 1/2" Street 90

My plan is to utilize Bargainfittings as they support HBT and also go with

2X- 1/2" NPT Female hose barbs for the wort thruput side of the chiller

Anyone know if SS hose ends are available for the water side?


Reply With Quote
Thread Tools

Forum Jump