House yeast strains - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > House yeast strains

Reply
 
Thread Tools
Old 02-04-2011, 03:13 PM   #1
WrathsU
Recipes 
 
Dec 2010
Orlando, FL
Posts: 39
Liked 1 Times on 1 Posts



Hi,

I read a recent excerpt from the Cigar City Blog (detailing the start of the brewery all they way up until present time) and I felt a bit confused. In their 14th blog post it states:

Quote:
"My conclusion for our standard house yeast strain is Thames Valley. I was considering American Ale but looked at all three strains and felt that the Thames would be more striking and best suit our needs. I think that it will still have the versatility of the American Ale strain for the most part and, with temperature controlled fermentations based on the style we are trying to create, should work just fine for us. "
Does this mean they use this yeast strain for all beers unless they need a very specific strain for a unique brand. I remember him saying something like they needed to use a different strain for a higher og beer...

If they do use that strain for most beers, is there a strain that home brewers use for most beers? It would make yeast-washing byproducts much easier to store as I don't need to save X amount of vials in my fridge so it would be nicer.



 
Reply With Quote
Old 02-04-2011, 03:27 PM   #2
Bensiff
Recipes 
 
Mar 2008
, Washington, the state
Posts: 4,848
Liked 377 Times on 296 Posts


Yes, commercial brewers use one strain for the bulk of their beers to keep costs down as buying a commercial pitch is pricey.

A home brewer can do the same, something like Wyeast 1056 or WL001 are common choices. Again, the reason is for cost cutting. However, a pitch of yeast for a homebrewer is relatively inexpensive so there is less financial incentive for a homebrewer to do so, especially when considering the enjoyment of experimenting the impact of different strains.



 
Reply With Quote
Old 02-04-2011, 03:30 PM   #3
Clonefarmer
Recipes 
 
May 2008
Springfield, MA
Posts: 1,329
Liked 6 Times on 6 Posts


Quote:
Originally Posted by Bensiff View Post
Yes, commercial brewers use one strain for the bulk of their beers to keep costs down as buying a commercial pitch is pricey.
They also re pitch frequently. Over time the strain they use can adapt to their brewery. At that point it really becomes their own house yeast. Quite a few breweries have a proprietary yeast strain that started out this way.
__________________
"Just remember Scooty Puff Jr. sucks!"....Philip J. Fry

 
Reply With Quote
Old 02-04-2011, 03:31 PM   #4
kanzimonson
Recipes 
 
Aug 2009
Charlottesville, VA
Posts: 2,174
Liked 44 Times on 40 Posts


I'd definitely recommend homebrewers only keeping one or two house strains around as well - the infrequency with which we brew means that we're storing yeast for (relatively) a lot longer than commercial breweries. You have to think there's some degradation in the quality of our yeast by the time we pitch it again (even if you make a starter, which you damn well better!).

I use 1968 in most of my ales and it's the only one I permanently keep around. If I want to use something else, I'll try to make several beers in a row with that strain (Belgian ones for example).

 
Reply With Quote
Old 02-04-2011, 03:42 PM   #5
heywolfie1015
Recipes 
 
Aug 2009
Los Angeles, California
Posts: 508
Liked 6 Times on 6 Posts


Quote:
Originally Posted by kanzimonson View Post
I use 1968 in most of my ales and it's the only one I permanently keep around. If I want to use something else, I'll try to make several beers in a row with that strain (Belgian ones for example).
This is a good choice. Adaptable to many styles, great flavor, and super flocculent. It's also my go to.

 
Reply With Quote
Old 02-04-2011, 03:49 PM   #6
WrathsU
Recipes 
 
Dec 2010
Orlando, FL
Posts: 39
Liked 1 Times on 1 Posts


I'm just a college student and obv can't afford to make 15 batches to try out every yeast strain but am very curious as to how much of a difference can be detected in say a SMASH recipe with 15 different ale yeasts?

 
Reply With Quote
Old 02-04-2011, 03:52 PM   #7
heywolfie1015
Recipes 
 
Aug 2009
Los Angeles, California
Posts: 508
Liked 6 Times on 6 Posts


Depends on the yeasts you use. If you just use variations on a standard American or British yeast, you will taste differences, but not much. However, if you go with an American yeast, a British yeast, a wit yeast, a hefe yeast, a Belgian abbey yeast, a kolsch yeast, and then some wild bugs, you will see a wide variety of beers.

 
Reply With Quote
Old 02-04-2011, 04:00 PM   #8
r_flagg
Recipes 
 
Dec 2009
Ventura, CA, CA
Posts: 116
Liked 1 Times on 1 Posts


I thought you could only wash your yeast up to five times before they start mutating, possibly contributing to off flavors and becoming less flocculent. How would a homebrewer be able to control that and consistently use the same strain each time?

 
Reply With Quote
Old 02-04-2011, 04:10 PM   #9
kanzimonson
Recipes 
 
Aug 2009
Charlottesville, VA
Posts: 2,174
Liked 44 Times on 40 Posts


WrathsU, the differences in yeast strains are amazing. For an easy experiment, split a batch in two and ferment with an American and English and prepare to be blown away. It really helps you realize that making wort is easy and the yeast do all the work.

r flagg, you're exactly right. I just try to be as clean as possible, but when I have the slightest bit of insecurity about my yeast culture, I dump it and start with a fresh pitch. Usually I develop my insecurity before the beer shows any signs of problems.

 
Reply With Quote
Old 02-04-2011, 05:07 PM   #10
ReverseApacheMaster
Registered User
Recipes 
 
Jul 2009
Keller, Texas
Posts: 4,881
Liked 254 Times on 196 Posts


Quote:
Originally Posted by r_flagg View Post
I thought you could only wash your yeast up to five times before they start mutating, possibly contributing to off flavors and becoming less flocculent. How would a homebrewer be able to control that and consistently use the same strain each time?
There's some dispute over how much that happens and I suspect that is partially strain-dependent.

If you use generation one in a batch, yeast wash into four mason jar, then you can do four batches on generation two. If you yeast wash each generation two into four mason jars, you end up with twenty one batches (one from generation one plus four for generation two plus sixteen for generation three). If you keep going out to five generations you end up with over 200 batches of yeast. Realistically, you will probably run out of room before you can keep and use that many mason jars.

If you pitch generation one and then use the whole cake five times in a row that would exhaust your five generations. It just depends on what you chose to do/feel comfortable with/works best for your needs.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pitching two different yeast strains paraordnance Fermentation & Yeast 1 11-12-2010 04:53 PM
Anyone Ever Tried Engineering Yeast Strains? TheWhaleShark Fermentation & Yeast 31 03-26-2010 05:26 PM
Which of these yeast strains should I use for an Irish Red Ale? aleiexjr Fermentation & Yeast 2 01-21-2010 05:37 AM
Yeast Strains & Sugar Tedpro Fermentation & Yeast 2 11-05-2009 03:15 AM
Yeast strains for brewing rhltechie Fermentation & Yeast 3 09-13-2009 11:24 PM


Forum Jump