Where to Install Ball Valve on 42 Quart Kettle? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Where to Install Ball Valve on 42 Quart Kettle?

Reply
 
Thread Tools
Old 02-01-2011, 09:39 PM   #1
ultravista
Recipes 
 
Mar 2007
Las Vegas, Nevada
Posts: 2,354
Liked 57 Times on 47 Posts



I recently acquired a Brinkman 42 quart kettle.

What is the optimum location to install the ball valve. Since it is a flat bottom kettle, I presume somewhere closest to the bottom.

Is there a rule of thumb for something like this? 1, 2, 3 inches from the bottom?




 
Reply With Quote
Old 02-01-2011, 10:00 PM   #2
maida7
Recipes 
 
Nov 2009
Asheville, NC
Posts: 2,827
Liked 48 Times on 41 Posts


as close to the bottom as possible.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding Ball Valve to Brew Pot - what kind of pickup to install for whirlpooling dmbeck2 Equipment/Sanitation 5 08-09-2010 05:07 PM
Adding Ball Valve to Brew Pot - what kind of pickup to install for whirlpooling dmbeck2 Equipment/Sanitation 0 08-03-2010 06:49 PM
Kettle Ball Valve Location..?? kuips Equipment/Sanitation 1 07-15-2010 09:23 PM
new ball valve for kettle Gumbys_Brew Equipment/Sanitation 0 11-17-2008 03:10 AM
Ball Valve for Kettle shertz Equipment/Sanitation 1 09-06-2008 07:10 PM


Forum Jump