from propane cylinder to manifold - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > from propane cylinder to manifold

Thread Tools
Old 02-01-2011, 04:44 AM   #1
Nov 2009
Portland, Oregon
Posts: 4

So my new single tier stand is almost complete, all in gleaming stainless. I had a professional build the gas beam similar to the Brutus, with 1/2 NPT fittings for all three burners. Tested leakproof. I'm going the low pressure route with banjo burners, standing pilots and BrewTroller controlled Honeywell gas valves. While the electronics are easy for me, I'm not too comfortable with the gas side, and I'll have a professional go over it before test firing. I just wanted to get the ordering started for the gas fittings, build it, and have it ready to be inspected.

Does one of you guys have a list of the items to go from the standard 20lb. cylinder to the 1/2 in FNPT on the gas manifold? I already have a Marshall 299-00 two stage regulator, but need hoses, bushings etc. Any suggestions/links?

Thanks, and pics of the rig will follow.

- Krazykraut

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Propane fittings - Manifold BendBrewer Brew Stands 5 01-18-2011 10:38 PM
O2 Cylinder Aeration czucker DIY Projects 6 10-15-2010 07:22 PM
Help with propane manifold build fishnfever Brew Stands 0 09-30-2010 07:26 PM
Question about building a Propane Manifold harten74 Brew Stands 4 11-20-2009 03:37 AM
Brewpot from a propane cylinder? thebikingengineer Kettles, Mash Tuns & Hot Liquor Tanks 7 05-02-2007 03:24 AM

Forum Jump