Hello everyone. New to posting, but have been lingering for awhile.
For my third batch of extract brew, I decided I needed something a bit stronger for springtime.
I bought a tripel extract kit from my local homebrew store, and brewed it up on Saturday. I made a yeast starter with some DME and the Wyeast trappist yeast the kit came with. The brew was bubbling in the primary within 12 hours and had krausen coming out the top of the bucket in 24. OG was 1.090 Temperature has been a constant 67 degrees.
Anyway, their instructions state to put in secondary after 1-2 days and then bottle in 10. Of course, I plan on letting this sit a bit longer. I transferred to the secondary today after the krausen died down. The secondary is still bubbling away, and we are at 1.040. My question is this:
I plan on putting this in the basement for a few months (about 62 degrees). Should I let it stay at the current 67 degrees for a few more days so the yeasties can do thier job without having to deal with the thermal change, or can I just put it in the basement now and leave it for 3 months? I want to make sure the fermentation has time to finish, but I don't want any off flavors from too much time in the higher temp (if that is even possible?)
Thanks in advance!