Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Perlick/Shank Connection Problem
Reply
 
Thread Tools
Old 01-26-2011, 07:29 AM   #1
uncleben113
Feedback Score: 7 reviews
Recipes 
 
Join Date: Jan 2010
Location: Chicago, IL
Posts: 470
Liked 7 Times on 6 Posts
Likes Given: 8

Default Perlick/Shank Connection Problem

I have looked and looked for a solution to this problem and have found that others have experienced it but I just can't find a solution that works for me.

So I have a Vissani kegerator with a tower that I got this past summer and I recently bought a Perlick 575SS. The faucet that came with the kegerator worked fine but I was ready for something a little nicer.

When I got my Perlick in, I noticed that the teeth on the inside of the faucet didn't match the teeth on the shank. So I'm not able to connect the two at all without beer spewing everywhere.

Here's a picture of the teeth on the Perlick where it is supposed to connect to the shank

http://s260.photobucket.com/albums/i...126_010102.jpg

And here are the teeth on the shank

http://s260.photobucket.com/albums/i...126_010051.jpg

I know that the pictures aren't great but you should be able to see my dilemma here.

I have read that the reason they won't fit is because my Perlick is SS and the shank is chrome plated. So I have researched SS shanks and the ones that I have found online that I can see the teeth don't seem to be any different from the shank I have.

I have heard another solution to the problem is to buy a SS Perlick shank but I can't find one anywhere.

I called Austin Homebrew and the customer service rep couldn't help me.

Can anyone help me, please?

I feel like I know what's wrong but I have to be missing something, right? I mean the pieces just aren't fitting together for me.

My kegerator is officially out of commission until I can get this fixed

Thanks for any help you can give


uncleben113 is offline
 
Reply With Quote
Old 01-26-2011, 02:27 PM   #2
JoMarky
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Albany, NY
Posts: 363
Liked 2 Times on 2 Posts

Default

I had the same problem on my 525's and chrome 3" shanks. I used a dremel with a burlew wheel and ground the grooves between the shanks teeth until it accepted the faucet, then got different o-rings to replace the stock ones that made a nice seal.

I searched and searched as well, and couldn't find a better way of doing it.


JoMarky is offline
 
Reply With Quote
Old 01-26-2011, 02:35 PM   #3
azscoob
Brewpub coming soon!
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
azscoob's Avatar
Recipes 
 
Join Date: Jun 2009
Location: Lake in the Hills, IL
Posts: 7,518
Liked 228 Times on 181 Posts
Likes Given: 213

Default

My friend had that issue, in the end he had to swap out the Perlick faucet, we went to the LHBS and tried several of them on a shank, he also brought an old faucet that fit his shanks at home, most of the Perlicks fit the shank, a couple didn't, he had one that didn't fit, so they replaced it.

We never found out if those Perlicks were meant to fit a different style shank or if there was a manufacturing issue, the LHBS sent back the ones that didn't fit the shank though and got replacements that all fit.
__________________
Shirts n Steins: Grain Reaper Brewing
azscoob is offline
 
Reply With Quote
Old 01-26-2011, 03:05 PM   #4
uncleben113
Feedback Score: 7 reviews
Recipes 
 
Join Date: Jan 2010
Location: Chicago, IL
Posts: 470
Liked 7 Times on 6 Posts
Likes Given: 8

Default

Grinding down the grooves sounds like an incredible pain. There's got to be an easier way.

I would take it to a HBS but the closest decent one is Austin and that's 5 hours away. So not all Perlicks are like this? I would hate to buy another Perlick because I'm not sure if Austin Homebrew would give me a refund on something that I bought so long ago.
uncleben113 is offline
 
Reply With Quote
Old 01-26-2011, 04:07 PM   #5
JoMarky
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Albany, NY
Posts: 363
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by uncleben113 View Post
Grinding down the grooves sounds like an incredible pain. There's got to be an easier way.

I would take it to a HBS but the closest decent one is Austin and that's 5 hours away. So not all Perlicks are like this? I would hate to buy another Perlick because I'm not sure if Austin Homebrew would give me a refund on something that I bought so long ago.
It wasn't too bad, it took me less than 20 minutes to do 4 shanks. I used a specialized metal polishing disc used in dentistry though, not sure what would be comparable.

I had 5 taps and 5 shanks. One tap was fine and fit all 5 shanks, the other 4 taps were faulty. From reading other threads the problem seems to be with the Perlicks, not the shanks. I mail ordered mine, so grinding down the shanks was a lot easier than mailing back the 4 faulty faucets and hoping I got 4 ones that worked in return.

If you choose to adjust your shank PM me and I can mail you some burlew discs if you would like.
JoMarky is offline
 
Reply With Quote
Old 01-27-2011, 08:14 PM   #6
uncleben113
Feedback Score: 7 reviews
Recipes 
 
Join Date: Jan 2010
Location: Chicago, IL
Posts: 470
Liked 7 Times on 6 Posts
Likes Given: 8

Default

Oh that doesn't sound bad at all. Maybe I'll do that. What would I need to have to do this properly?

And which new O-rings worked to create a good seal for you?
uncleben113 is offline
 
Reply With Quote
Old 02-07-2011, 02:53 AM   #7
uncleben113
Feedback Score: 7 reviews
Recipes 
 
Join Date: Jan 2010
Location: Chicago, IL
Posts: 470
Liked 7 Times on 6 Posts
Likes Given: 8

Default

THAT WORKED! for those of you who have the same problem, I used a dremil to lightly grind down the teeth on the shank and the faucet and now it makes a great seal.

Thank you so much JoMarky.

Time to brew some beer!!!
uncleben113 is offline
 
Reply With Quote
Old 02-07-2011, 05:04 AM   #8
TheSlash
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2010
Location: Cereal City, MI
Posts: 288
Liked 5 Times on 4 Posts
Likes Given: 9

Default

Mmm this must be my deal. I had 2 perlicks working fine, added a third and that's the one that was shooting seltzer water out the little holes. I just tightened the living crap out of it until it stopped leaking. I have like 40 psi on it and it's held for a month so far, but sounds like I really should replace the faucet and not the shank. Drats...

Thanks
TheSlash is offline
 
Reply With Quote
Old 02-07-2011, 05:46 AM   #9
uncleben113
Feedback Score: 7 reviews
Recipes 
 
Join Date: Jan 2010
Location: Chicago, IL
Posts: 470
Liked 7 Times on 6 Posts
Likes Given: 8

Default

Yeah I'm not really sure why those faucets are so much different and it is just painful to think about having to replace my perlick but this seemed to work just fine.

Oh and I also added some teflon tape to where they connect to one another. I'm not 100% sure that this made the difference but it wouldn't hurt to try
uncleben113 is offline
 
Reply With Quote
Old 03-28-2011, 04:40 PM   #10
nibbler
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Location: Boulder, CO
Posts: 7
Default

Quote:
Originally Posted by uncleben113 View Post
THAT WORKED! for those of you who have the same problem, I used a dremil to lightly grind down the teeth on the shank and the faucet and now it makes a great seal.

Thank you so much JoMarky.

Time to brew some beer!!!
Did you grind down the shank teeth all the way, or just a little off the top?

Sounds like you also ground down the inside of the Perlick faucet too, correct?

Do the teeth still mate?


nibbler is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Perlick Faucet Problem bayareabeer Equipment/Sanitation 38 10-06-2011 12:22 PM
propane reg. connection. beerlover69 Equipment/Sanitation 1 01-15-2010 12:03 AM
Keg Connection jjbrew Equipment/Sanitation 8 12-21-2009 01:29 AM
Looking for a Propane Tee Connection Sir Humpsalot Equipment/Sanitation 4 03-02-2008 12:32 PM
CFC pump connection ddknight Equipment/Sanitation 2 02-20-2008 03:42 PM


Forum Jump

Newest Threads