Home Brew Forums > Home Brewing Beer > Electric Brewing > supply cord connectors
Reply
 
Thread Tools
Old 01-24-2011, 03:30 PM   #1
dutch-brew
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: s.e.missouri
Posts: 202
Liked 1 Times on 1 Posts

Default supply cord connectors

Have the e-keggle up and running now for a while, but was wanting to be able to take my supply cord off to make my electrical toolbox more mobile. I have one of those GFCI cords off ebay on it, and it's very stiff.

question is, will these connectors i found on ebay work for me.
http://cgi.ebay.com/L14-30-30A-Plug-...item19bb90c751

I am running a 5500W element, meaning the 30 amp connectors will work. When measuring my actual voltage though, i read slightly over 125 V, so more than 250V on my wires.

Could anyone ring in on this? Will i need to go for the 480V connectors instead?

thanks,
Fred


dutch-brew is offline
 
Reply With Quote
Old 01-24-2011, 04:01 PM   #2
gunner65
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Lexington, KY
Posts: 844
Liked 16 Times on 13 Posts
Likes Given: 1

Default

They will work. Are you measuring your voltage under load?(doubtful) Open circuit voltage will read higher than then actual loaded.


__________________
Single Vessel BIAB is all I need....Until we figure out the no vessel technique.
gunner65 is offline
 
Reply With Quote
Old 01-24-2011, 04:42 PM   #3
dutch-brew
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: s.e.missouri
Posts: 202
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by gunner65 View Post
They will work. Are you measuring your voltage under load?(doubtful) Open circuit voltage will read higher than then actual loaded.
No, not under load. Didn't think about that.
dutch-brew is offline
 
Reply With Quote
Old 01-24-2011, 05:26 PM   #4
Chefkeith
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Chefkeith's Avatar
Recipes 
 
Join Date: Nov 2009
Location: Peoria, Illinois
Posts: 111
Liked 2 Times on 2 Posts
Likes Given: 2

Default

From what I understand, it's common for residential service voltage to vary slightly. I don't think it should be an issue.
Chefkeith is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
XLR connectors waterproof? terrazza Electric Brewing 7 07-16-2011 05:15 AM
2 Pole GFCI Breaker With 4 Wire Cord? ScubaSteve Electric Brewing 8 02-08-2011 07:37 PM
Is this a good price for a 30A 240v extension cord HossTheGreat Electric Brewing 3 01-21-2011 12:35 AM
Spade Connectors for PID's? ScubaSteve Electric Brewing 25 12-27-2010 03:52 PM
extension cord to fridge? kornbread Electric Brewing 4 12-17-2010 01:09 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS