Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > My idea for a Steam Mash system in a Bucket
Reply
 
Thread Tools
Old 02-12-2007, 08:50 PM   #1
mew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2006
Posts: 853
Liked 8 Times on 4 Posts

Default My idea for a Steam Mash system in a Bucket

I like building things, so I decided to try and make a steam-injected mash system. I decided to use the bucket-in-a-bucket false bottom system in order to save money in case I ended up melting it or something (better to melt a bucket than a cooler). I'm attemping this for a mini-mash system just to see if it will work. One problem would be to keep the temp. contant for a few hours, but I think by keeping the steam on low it would work. I'll try it and see. Here's a link to my crude drawing:
SIMIAB

Do y'all think it will end up working?


__________________
Primary: Pilsner
Secondary: Empty
Keg 1: Dunkelweizen
Keg 2: Empty
mew is offline
 
Reply With Quote
Old 02-12-2007, 11:23 PM   #2
Trappist Artist
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2006
Posts: 113
Default

I doubt that the heat transfer between the plastic will be very good, but hey, I say you do it in the name of science!


Trappist Artist is offline
 
Reply With Quote
Old 02-13-2007, 01:31 AM   #3
mew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2006
Posts: 853
Liked 8 Times on 4 Posts

Default

In the name of science!
__________________
Primary: Pilsner
Secondary: Empty
Keg 1: Dunkelweizen
Keg 2: Empty
mew is offline
 
Reply With Quote
Old 02-13-2007, 04:41 AM   #4
brewman !
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2006
Posts: 1,393
Liked 28 Times on 25 Posts
Likes Given: 33

Default

*laughs

That is exactly what I am going to try this weekend, only I'm going to use a small cooler instead of a bucket.

The thing I found with microwaving my mash is that unless the container is insulated, the temperature in the mash isn't very even. As a matter of fact its cold at the top, bottom and the sides. So I recommend using an insulated cooler.

I'm using an old steam kettle. I'm feeding the steam in from the top instead of underneath the false bottom. There are some dynamics with the steam interacting with the water that might be in the line feeding it. I think I'll need some sort of a checkvalve so that the steam is released right at the bottom of the vessel. As soon as the steam hits water it going to release the heat and you have to make sure that doesn't happen in the line. Or maybe the steam has to be volumous enough that it pushes the wort out of the feed line. It will take some playing around to get it right.

Keep us informed. I'll write up my experiment when its done. Right now I can't find a cooler !
__________________
Getting back into brewing...
brewman ! is offline
 
Reply With Quote
Old 02-13-2007, 06:18 AM   #5
mew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2006
Posts: 853
Liked 8 Times on 4 Posts

Default

I agree that a cooler would be more apropos, but for my first attempt it'll have to be cheapo buckets. If it works I'll write up a whole how-to. Keep us posted on your project!


__________________
Primary: Pilsner
Secondary: Empty
Keg 1: Dunkelweizen
Keg 2: Empty
mew is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Easy Steam Infusion Mash System FlyGuy Brew Stands 231 06-28-2015 07:54 PM
Steam Injected Mash System brewman ! Equipment/Sanitation 91 04-06-2012 06:50 AM
DIY Steam Mash System by Yuri Yuri_Rage Brew Stands 43 12-31-2011 01:55 PM
brewing with steam help me refine the idea please contagent93 Equipment/Sanitation 24 12-18-2008 03:20 AM
Steam generator idea Cede Brew Stands 4 06-07-2007 05:19 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS