Jet burner orifice size? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Jet burner orifice size?

Reply
 
Thread Tools
Old 01-15-2011, 05:07 AM   #1
cgondoli1
Recipes 
 
Feb 2010
Rochester, NY
Posts: 104
Liked 1 Times on 1 Posts



Can someone with a low pressure 10 tip jet burner please tell me what the orifice size is? I have a 44 tip high pressure burner and im planning to make three small burners and run on low pressure. Thanks

 
Reply With Quote
Old 01-16-2011, 04:42 PM   #2
cgondoli1
Recipes 
 
Feb 2010
Rochester, NY
Posts: 104
Liked 1 Times on 1 Posts


Anyone have one that could help me out??

 
Reply With Quote
Old 01-16-2011, 05:56 PM   #3
P-J
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Mar 2010
Charlotte, NC
Posts: 3,337
Liked 301 Times on 235 Posts


You did not say which gas you were going to be using:

The burner is an impinging jet design. The natural gas burner has an orifice that is a #56 wire drill gage size. If it has one, the pilot jet has the same size orifice.

The propane burner of the same design has jets that are #75 wire drill gage size. The pilot jet is also the same size.

Hope this helps.

BTW - this is from measurements that I took from my burners way back in January of 2007. I had to dig up the info from when I had posted it in another forum.

 
Reply With Quote
Old 01-17-2011, 12:56 AM   #4
cgondoli1
Recipes 
 
Feb 2010
Rochester, NY
Posts: 104
Liked 1 Times on 1 Posts


Thank you so much, i want to keep it propane just use low pressure. is that the size for lp lp?

 
Reply With Quote
Old 01-17-2011, 01:03 AM   #5
P-J
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Mar 2010
Charlotte, NC
Posts: 3,337
Liked 301 Times on 235 Posts


Quote:
Originally Posted by cgondoli1 View Post
Thank you so much, i want to keep it propane just use low pressure. is that the size for lp lp?
That is the correct size for low pressure propane. #75 wire drill gage.

 
Reply With Quote
Old 01-17-2011, 01:42 AM   #6
cgondoli1
Recipes 
 
Feb 2010
Rochester, NY
Posts: 104
Liked 1 Times on 1 Posts


Thanks! tomorrow i can get to drillin!

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Questions on boring Propane orifice for NG timbudtwo Brew Stands 4 08-28-2010 08:07 PM
Gas Burner dRaPP Brew Stands 12 08-04-2010 03:35 PM
jet burner pipe size? schristian619 Brew Stands 3 06-14-2010 09:05 PM
Brass propane orifice to hard pipe connection? HomeBrewFoSho Brew Stands 23 04-08-2010 10:21 PM
high pressure orifice wolfe006 Brew Stands 5 05-15-2009 12:28 PM


Forum Jump