Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Electric Brewing > Would this work for a 20A/120V power cable?
Reply
 
Thread Tools
Old 01-11-2011, 06:28 PM   #1
thelorax121
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Athens GA
Posts: 423
Liked 1 Times on 1 Posts
Likes Given: 1

Default Would this work for a 20A/120V power cable?

I am getting ready to finish putting my control panel together and have been looking for a cable to connect with my inline GFCI (20A) rating, and was wondering if the cable below would work. I am almost positive that it should be fine for a 20A system, but the whole "boat wire" thing is throwing me off, adn I just wanted to get verification that this would be sufficient before I drop $. Thanks for the help, sorry it is kind of a dumb question!

http://cgi.ebay.com/ebaymotors/10-3-...ssoriesQ5fGear


thelorax121 is offline
 
Reply With Quote
Old 01-11-2011, 06:36 PM   #2
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Walker's Avatar
Recipes 
 
Join Date: Sep 2005
Location: Cary, NC
Posts: 11,244
Liked 97 Times on 86 Posts
Likes Given: 11

Default

yes, it would work, but in my opinion, you can get a much nicer cable for a much better price.

Examples:
http://www.stayonline.com/detail.aspx?ID=15113
http://www.stayonline.com/detail.aspx?ID=18161

There are other cables on that site, too.

These don't have free shipping, but are cheaper per foot, and have a MUCH nicer outer jacket on them than that PVC jacket on the ebay cable.


__________________
Ground Fault Brewing Co.
Walker is offline
 
Reply With Quote
Old 01-11-2011, 06:38 PM   #3
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Walker's Avatar
Recipes 
 
Join Date: Sep 2005
Location: Cary, NC
Posts: 11,244
Liked 97 Times on 86 Posts
Likes Given: 11

Default

This one has a PVC jacket like the ebay cable, but it is only $0.65/foot

http://www.stayonline.com/detail.aspx?ID=15114
__________________
Ground Fault Brewing Co.
Walker is offline
 
Reply With Quote
Old 01-12-2011, 05:06 AM   #4
thelorax121
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Athens GA
Posts: 423
Liked 1 Times on 1 Posts
Likes Given: 1

Default

awesome, they actually have a flanged receptacle that I need as well, so this justifies the shipping. Thanks for the heads up!
thelorax121 is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thinking about 120v BIAB setup theschick Electric Brewing 41 01-13-2012 02:29 AM
Looking for a 2 pole Contactor, 30A, 120V Coil that is Din rail mountable Windsors Electric Brewing 21 01-02-2012 06:39 AM
Any 120V Setups for 10 Gal Batch? JJWP Electric Brewing 30 05-30-2011 11:17 PM
120v Electric 5 gal Brewery wh4tig0t Electric Brewing 13 04-08-2011 03:41 PM
120v Switches CoalCracker Electric Brewing 7 10-15-2010 08:53 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS