Irish coffin sizing help - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Irish coffin sizing help

Reply
 
Thread Tools
Old 01-11-2011, 02:48 AM   #1
mrgreen4242
Recipes 
 
Dec 2009
Grand Ledge, MI
Posts: 107


I just snagged a great 15 cu ft Frigidair freezer on CL and I'm off to the races designing my keezer. Planning on a collarless design, with a 5' countertop on 4' lid, with a 4' Irish coffin style box at the back of he countertop to make a sort of kitchen island, which will eventually form part of a larger bar counter arragement.

So my questions are, what is the minimum depth of an Irish coffin? Will 8" give enough space? How about 6"? Also, what about height? How high above the counter top should the top of the coffin be, approximately, and how high should the center of the faucets be?

Thanks for your input!
__________________
Primary: None
Secondary: None
Kegged: Jack the Ripper London Ale Redux, Blue Moon Clone
Bottled: Must-Go APA, Mint Chocolate Stout
All gone: Jack the Ripper London Ale, Silver Dollar Cream Ale, Graff, Strawberry Wheat, "777" Rye IPA, Pomegranate Pilsner, Deer Camp Ice American Ale (19% ABV), Cream of Three Crops Ale, Pumpkin Spice Ale
Up Next: Something like Aprihop and/or Magic Hat #9

 
Reply With Quote
Old 01-11-2011, 01:58 PM   #2
specialized
Recipes 
 
May 2010
New Jersey
Posts: 173
Liked 2 Times on 2 Posts


I've got a 4 tap coffin box and the depth of mine is about 8 inch at the narrowest point. My box has an angled cut, just for aesthetics. I would recommend having it 9” at the narrowest point. Reason being that insulation will take up a considerable amount of space. My box has 2” insulation on the front and back and also a 3-4” air pocket gap between the insulation. I wish I could narrow the gap between the insulation but bends in beer line can only so acute. Although that could be solved with a 90 degree beer nut, or a smaller shank.

As far as height goes I think my box is about 13-14 inches high. The hole where the shank goes through is centered about 11 inch high. I’m happy with the height as it allow most glasses to sit flat under the faucet. If anything I would increase this slightly by an inch. It’s good for regular pint glasses but 22 oz pilsner glasses need to be filled at an angle.

I’ve got a to scale sketchup file of my coffin box if you’re interested. Just PM me your email and I’ll send it out.

 
Reply With Quote
Old 01-12-2011, 01:06 AM   #3
WPStrassburg
Recipes 
 
Sep 2008
Rochester, NY
Posts: 584
Liked 37 Times on 32 Posts


Specialized, PM sent.

Can you do growler fills under it or do they have to be tipped the whole time too?

 
Reply With Quote
Old 01-12-2011, 02:18 AM   #4
specialized
Recipes 
 
May 2010
New Jersey
Posts: 173
Liked 2 Times on 2 Posts


Dunno never tried. I imagine i'd have to tilt that as well.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Irish Coffin Box - Portable mrbowenz Kegerators & Keezers 9 12-20-2010 06:52 PM
Keezer coffin questions skibumdc Kegerators & Keezers 1 11-10-2010 03:22 PM
My New Fermentation coffin!! steveo929 Fermenters 9 05-21-2010 07:08 AM
Coffin builds (irish coffins, wooden towers) kegtoe Kegerators & Keezers 10 12-21-2009 02:49 PM
Irish Coffin Builders Dwain Kegerators & Keezers 0 07-31-2009 06:06 PM


Forum Jump