Wyeast Lambic Blend problem - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Lambic & Wild Brewing > Wyeast Lambic Blend problem

Reply
 
Thread Tools
Old 01-10-2011, 04:18 AM   #1
smpow
Recipes 
 
Jun 2010
POW
Posts: 36
Liked 1 Times on 1 Posts



Howdy - First time brewing a Kriek/Plambic. Using Northern Brewer's Kriek recipe as a guide I made a extract batch, with about 3 points higher OG @ 1.056.

I used a wort-chiller to cool my 4.2 gallon boil to about 80, topped it off to just over 5 gallons, and pitched the lambic blend packet. The date on the blend was Feb 2010, so pretty old. The smack pack did not really bulge at all, but I have not had problems before...

Oh yeah, after cooling, I aerated with my drill attachment, realizing now that pedio does not like that...

Anyway, I pitched the blend 3 days ago, and I have not seen any activity. I have pretty much given up on the yeast starting, so will probably pitch more of something?

So, my question: Can I pitch another yeast and achieve similar results, as I have numerous dry yeasts around; or should I find another packet of the lambic blend to pitch?

If another yeast can fit the bill as some of the other goodies in the blend (brett, etc.) may be working without showing activity, what do you suggest?

Long-winded first post, so I hope that someone has some suggestions. Thanks for your help.

 
Reply With Quote
Old 01-10-2011, 04:32 AM   #2
blizzard
HBT_LIFETIMESUPPORTER.png
 
blizzard's Avatar
Recipes 
 
Mar 2009
Denver, CO
Posts: 3,338
Liked 869 Times on 584 Posts


I pitched a relatively fresh pack in my first batch and it took about 3 days to take off. I suspect an older pack may take longer. However, you can pitch also pitch an ale yeast to get things going. Also, many people pitch dregs from sours to increase sourness and complexity.
__________________
Primary/Secondary/Bottles/Kegged: Delicious, delicious beer

 
Reply With Quote
Old 01-10-2011, 04:59 AM   #3
ryane
Recipes 
 
Nov 2008
Washington
Posts: 841
Liked 7 Times on 7 Posts


a pack from feb of last year is pretty old, I would suggest adding another pack of lambic blend and the dregs of some commercial sours, you generally want fermentation to start fairly quickly and 3days is pushing the limit a bit too much

if you cant get a hold of another lambic pack soon I would add some dry sacch, let it run and you can add malto later to help feed whatever bugs are in there

 
Reply With Quote
Old 01-10-2011, 05:22 PM   #4
smpow
Recipes 
 
Jun 2010
POW
Posts: 36
Liked 1 Times on 1 Posts


Naturally, once I think I have an issue - I don't. Started bubbling away this morning, just needed extra long to wake up.
I smacked it last Sunday (total of 7.5 days), waited 3 days for it to expand, didn't want to make a starter, as I didn't want to possibly infect my foam stopper. So, all in all, I wasn't too worried, as maybe an infection in this brew isn't too bad, but still wanted to get things working. Everything just takes time.

Thanks all for the suggestions. Using non-bacterial yeast strains, I make a starter on bigger beers or if my smack pack doesn't expand much. Thanks again.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wyeast Lambic Blend vs. White Labs Belgian Sour Mix jgardner6 Lambic & Wild Brewing 2 11-16-2010 06:52 PM
Anyone know what's in Wyeast 9097, Old Ale Blend Calder Lambic & Wild Brewing 6 11-01-2010 10:31 PM
Wyeast Belgian Lambic Blend Ace_Club Lambic & Wild Brewing 5 02-22-2010 01:13 AM
Slanting Lambic Blend Atticmonkey Lambic & Wild Brewing 10 12-09-2009 06:17 PM
Lambic blend starter question dontman Lambic & Wild Brewing 15 11-27-2009 06:29 PM


Forum Jump