Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Ziegler's 48 Qt Mash/Lauter Tun
Thread Tools
Old 12-30-2010, 10:03 PM   #1
Feedback Score: 0 reviews
Join Date: Oct 2008
Location: Illinois
Posts: 48
Liked 1 Times on 1 Posts

Default Ziegler's 48 Qt Mash/Lauter Tun

Finished my Mash/Lauter Tun this morning and wanted to share some pictures. I have only ran water and oxy-clean through the system a couple of times, but I plan to use it tomorrow for an all-grain batch. The manifold is 1/2" CPVC with slots cut every 1/2" along the pipe. Since the manifold sits lower than the outlet, the last few connections are solid, so that the siphon can pull down to the bottom of the manifold.

adamziegler is offline
Reply With Quote
Old 12-31-2010, 12:20 AM   #2
BIAB Expert Tailor
Vendor Ads 
Feedback Score: 10 reviews
wilserbrewer's Avatar
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 8,905
Liked 1108 Times on 862 Posts
Likes Given: 16


Nice build, and that's coming from a braid guy...
wilserbrewer is offline
Reply With Quote

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Recommendation for Mash/Lauter Tun fusa Equipment/Sanitation 4 03-11-2010 02:51 AM
24 Qt Mash/Lauter Tun? pdxhophead Equipment/Sanitation 3 03-08-2008 10:22 PM
Using you Mash Tun as a Lauter Tun Forrest Equipment/Sanitation 4 03-01-2007 05:06 PM
Mash/Lauter tun dimensions DyerNeedOfBeer Equipment/Sanitation 2 06-03-2005 05:48 PM

Forum Jump