TAD Tap a draft extension line - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > TAD Tap a draft extension line

Thread Tools
Old 12-25-2010, 07:30 AM   #1
Nov 2010
Stanton, CA
Posts: 7

Santa brought an new Tap-A-Daft system for Christmas! I am definitely going to try using the tap as-is (have a Nut Brown Ale just waiting for it). But I am already thinking about future modifications. one thought is leave the tap fully open and use a male/male hose barb to run an extension line out to a real tap for some flexibility. I think this would come in handy (especially with stouts where you could employ a restrictor plate and flow straightener...) Has anyone done something like this? Any pitfalls? I realize that molded-in the output tube is pretty short, and not that big in diameter, (that's what she said!!!!) but it seems you can fit a correctly sized hose barb in there if you leave the installed tap fully open or remove it altogether...

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Line Extension gcsowden Bottling/Kegging 1 12-12-2010 09:33 PM
Force Carbing Draft at Home/Tap a Draft from CO2 Tank RogerMcAllen Bottling/Kegging 0 09-11-2010 12:24 AM
Questions about long vertical draft line runs Mischief_Brewing Bottling/Kegging 0 04-12-2010 04:34 PM
How to run draft beer line from keg 1 floor below? MerionInn Bottling/Kegging 3 03-11-2010 11:25 PM
4912 draft tower extension 8string Bottling/Kegging 6 03-13-2008 07:00 PM

Forum Jump