Coldbreak Brewing Giveaway - Winners Drawn!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Not enough priming sugar...
Reply
 
Thread Tools
Old 12-23-2010, 02:19 PM   #1
trevorc13
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2010
Location: Milwaukee, Wisconsin
Posts: 412
Liked 3 Times on 3 Posts
Likes Given: 4

Default Not enough priming sugar...

I made a six pack of an imperial nut brown and bottled it with maple syrup. I used John Palmers measurements for maple syrup at 5.5 oz per 5 gal. Since I bottled .5 gal, I decided to try to weigh out .55 oz of maple syrup. Well if you've ever used syrup you know you don't get it all out of your container. After bottling I also noticed some syrup residue in the bottling bucket. Well long story short, my beer is not well carbonated. This was two weeks ago, enough time to carb them up considering I added yeast to the bucket too. They've been sitting at 70f and are pretty flat. Could I open up the rest of the beer and add a few drops more syrup, or is the yeast in there dying/dead already? If so, how much syrup is too much?


__________________
Thanks for the input
trevorc13 is offline
 
Reply With Quote
Old 12-23-2010, 04:06 PM   #2
mojotele
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Baltimore, MD
Posts: 837
Liked 18 Times on 18 Posts
Likes Given: 5

Default

The yeast is alive and well. If it was dead your beer would taste and smell awful. You can add more to each bottle. The trouble is figuring out how much to add to each bottle. It may be so small that it is difficult to measure.

The alternative is to redo your bottling. This time, try measuring out your syrup and mix it in hot boiling water. That should thin it out so you have less problems. After pouring the mixture in your bottling bucket, slowly pour each bottle into the bucket. Try to avoid splashing as much as possible. I had to do this once, and I poured the beer down the side of the bucket while trying to keep it as far down in the bucket as I could without touching the beer.

Anyway, there's lots of ways to do this. That's two of them. Good luck!


mojotele is offline
 
Reply With Quote
Old 12-23-2010, 04:15 PM   #3
Pappers_
Moderator
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
Pappers_'s Avatar
Recipes 
 
Join Date: Jan 2009
Location: Chicago
Posts: 12,701
Liked 1224 Times on 839 Posts
Likes Given: 2376

Default

+1 to the above advice for dissolving the syrup next time.

For now, what I would do is either 1) give it more time or 2) use carbonation tabs - the kind where you add one tab to each bottle. Trying to measure out individual bottle-sized amounts of syrup sounds like a nightmare to me.
Pappers_ is offline
 
Reply With Quote
Old 12-23-2010, 04:15 PM   #4
PVH
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Denver
Posts: 575
Liked 15 Times on 12 Posts
Likes Given: 1

Default

How big a beer is your Imperial Nut Brown? I ask for two reasons. First, higher gravity beers often take longer to carb up. Second, an imperial nut brown could taste better with less carbonation, especially if drunk on the warm side.
PVH is offline
 
Reply With Quote
Old 12-23-2010, 04:18 PM   #5
Pappers_
Moderator
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
Pappers_'s Avatar
Recipes 
 
Join Date: Jan 2009
Location: Chicago
Posts: 12,701
Liked 1224 Times on 839 Posts
Likes Given: 2376

Default

Quote:
Originally Posted by PVH View Post
How big a beer is your Imperial Nut Brown? I ask for two reasons. First, higher gravity beers often take longer to carb up. Second, an imperial nut brown could taste better with less carbonation, especially if drunk on the warm side.
+1 yeasties do not like high alcohol environments and bigger beers take longer to bottle carb
Pappers_ is offline
 
Reply With Quote
Old 12-23-2010, 04:24 PM   #6
trevorc13
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2010
Location: Milwaukee, Wisconsin
Posts: 412
Liked 3 Times on 3 Posts
Likes Given: 4

Default

It's a 10.7% abv. It has a slight carbonation, and Is not difficult to drink, but I would like to see a nice head on it when I pour. I'll give the beer another week or so to see if it carbs up a little better, if not I'll try to add another couple drops of syrup. I guess I was also wondering if the existing yeast in there would have been killed off by then?
__________________
Thanks for the input
trevorc13 is offline
 
Reply With Quote
Old 12-23-2010, 04:32 PM   #7
PVH
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Denver
Posts: 575
Liked 15 Times on 12 Posts
Likes Given: 1

Default

Quote:
Originally Posted by trevorc13 View Post
It's a 10.7% abv. It has a slight carbonation, and Is not difficult to drink, but I would like to see a nice head on it when I pour. I'll give the beer another week or so to see if it carbs up a little better, if not I'll try to add another couple drops of syrup. I guess I was also wondering if the existing yeast in there would have been killed off by then?
Yeah, with that ABV, I would not expect the beer to be carbed up in three weeks. Personally, I would wait a couple months before doing anything. It probably needs to condition that long in the bottle anyway.

And no, the yeast will not be killed off by then. It is not as if they have a certain time period in which they can do their work, and if it expires, they poop out. They have their own schedule. I recommend accommodating them instead of trying to force them to do what you want in the time period you have allotted them. Everything might be fine - the leftover syrup in your bottling bucket might not be enough to make a big difference. Only time will tell.
PVH is offline
 
Reply With Quote
Old 12-23-2010, 05:10 PM   #8
dpittard
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Athens, Ga
Posts: 190
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by mojotele View Post
Try to avoid splashing as much as possible. I had to do this once, and I poured the beer down the side of the bucket while trying to keep it as far down in the bucket as I could without touching the beer.
Pour down the side seems kind of counter-productive to me. Pour like this increases the surface area of the beer as is rolls down the side of the bucket. Larger surface area means more contact with atmosphere.

I agree that you don't want to splash the beer, but I would pour from the bottle as close to the surface of the beer in the bucket as I could.
dpittard is offline
 
Reply With Quote
Old 12-23-2010, 08:20 PM   #9
mojotele
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Baltimore, MD
Posts: 837
Liked 18 Times on 18 Posts
Likes Given: 5

Default

Quote:
Originally Posted by dpittard View Post
Pour down the side seems kind of counter-productive to me. Pour like this increases the surface area of the beer as is rolls down the side of the bucket. Larger surface area means more contact with atmosphere.
That's entirely possible and is something I didn't consider. I was just trying to minimize splashing and it seemed like a convenient way to slow the flow. I'm no chemist

Anyway, I'm with the other posters who say give it more time. At 10% ABV you need much, much more time to carbonate than 2-3 weeks.


mojotele is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
cane sugar vs priming (corn) sugar for priming... timgman Beginners Beer Brewing Forum 11 10-24-2012 12:13 AM
LD Carlson priming sugar vs corn sugar zoxygen Beginners Beer Brewing Forum 2 11-18-2009 01:25 AM
With not enough corn sugar for priming, can I blend with cane sugar? snailsongs Beginners Beer Brewing Forum 6 06-19-2009 03:10 AM
Too much priming sugar? patbrew Beginners Beer Brewing Forum 6 12-20-2008 12:12 PM
Priming Sugar woosterhoot Beginners Beer Brewing Forum 8 04-19-2007 01:36 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS