Auber 2352 PIDs - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Electric Brewing > Auber 2352 PIDs

Reply
 
Thread Tools
Old 12-23-2010, 08:28 AM   #1
terrazza
Recipes 
 
Dec 2007
portland
Posts: 168
Liked 4 Times on 3 Posts



Regarding the alarm output on these PIDs, what I'd like to know is if when your temperature of your process (say mash) is reached, can you program the alarm ouput to signal for let's say only 20 to 30 seconds, vs it signalling the alarm until the temperature is brought down below the setting? If so, how do you program one to behave this way?

Thank you!

 
Reply With Quote
Old 10-13-2011, 04:19 AM   #2
terrazza
Recipes 
 
Dec 2007
portland
Posts: 168
Liked 4 Times on 3 Posts


bump....

 
Reply With Quote
Old 10-13-2011, 04:21 AM   #3
kevink
Recipes 
 
Jan 2010
PA
Posts: 723
Liked 99 Times on 68 Posts


Holy crap! Still looking for an answer 10 months later? Someone help him out!

 
Reply With Quote
Old 10-13-2011, 04:27 AM   #4
xsists
Recipes 
 
Nov 2006
Waukesha, WI
Posts: 379
Liked 10 Times on 9 Posts


From what I've seen in most builds is a alarm reset button. I don't think there is a setting for 30 seconds or whatever. Just my observation.

 
Reply With Quote
Old 10-13-2011, 12:43 PM   #5
acefaser
Recipes 
 
Feb 2011
firestone, co
Posts: 347
Liked 19 Times on 13 Posts


No the alarm sounds anytime the temperature threshold is exceeded and continues until out of the range. So if you set it for 125 as you heat your water and it reaches 125 ther alarm will sound and continue to sound until the temp falls below 125. This is why most people incorporate a alarm on/off switch into their build.

Sent from my myTouch 3G Slide using Home Brew Talk

 
Reply With Quote
Old 10-13-2011, 10:17 PM   #6
hatfieldenator
 
hatfieldenator's Avatar
Recipes 
 
Sep 2010
Posts: 493
Liked 17 Times on 14 Posts


Quote:
Originally Posted by acefaser View Post
No the alarm sounds anytime the temperature threshold is exceeded and continues until out of the range. So if you set it for 125 as you heat your water and it reaches 125 ther alarm will sound and continue to sound until the temp falls below 125. This is why most people incorporate a alarm on/off switch into their build.

Sent from my myTouch 3G Slide using Home Brew Talk
Yup, he's right. Its either on or off depending on your threshold. I highly recommend incorporating an on/off switch for the alarm because they are annoying as hell otherwise

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Auber 2352 vs. 2362 paledragon Electric Brewing 0 12-19-2010 02:24 PM
Auber Sous Vide Controller DKershner Electric Brewing 9 12-10-2010 12:25 AM


Forum Jump