Brewhemoth conicals? - Page 70 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Brewhemoth conicals?

Reply
 
Thread Tools
Old 05-13-2012, 02:16 PM   #691
daufdi
Recipes 
 
May 2008
Posts: 33

Good idea. I will do that next time. Lesson learned.

 
Reply With Quote
Old 05-14-2012, 12:55 AM   #692
erikrocks
HBT_SUPPORTER.png
 
erikrocks's Avatar
Recipes 
 
Jun 2009
Ithaca, NY
Posts: 595
Liked 18 Times on 15 Posts


Quote:
Originally Posted by nostalgia View Post
The real solution is to dump smaller amounts of trub earlier and more often to prevent the yeast cake from compacting so thoroughly. After two weeks it should be a pretty tight cake, and it's not going to move easily.

I've been taking my first dump after I see fermentation pass its peak, maybe 3-4 days in.

-Joe
Joe--Are you dumping your first dump and washing the second dump? Or do you wash the first dump and dump the second dump.

I love the number of dumps I can get in in a single reply to this thread...

 
Reply With Quote
Old 05-14-2012, 06:15 PM   #693
Lennie
Recipes 
 
Dec 2008
Hannibal, MO
Posts: 584
Liked 13 Times on 12 Posts


I believe you get rid of the first dump since it is primarily trub and dead yeast, then keep and wash the second and third dumps.

 
Reply With Quote
Old 05-16-2012, 02:12 AM   #694
Lennie
Recipes 
 
Dec 2008
Hannibal, MO
Posts: 584
Liked 13 Times on 12 Posts


My friend and I just brewed up a fourth 15gal batch for the Brewhemoth, this time an American wheat. Both wives like this style. Previously we each brewed with our systems to come up with 15gal. As of this week I got my equipment in order to brew 15gal myself, including a 72qt cooler MLT, a 20gal kettle, a 50' IC and whirlpool attachment, a March pump, even a homemade mash paddle. The only thing I haven't made is a stand, I'm thinking about the design now that I've made a couple batches with my equipment.

 
Reply With Quote
Old 05-16-2012, 11:34 AM   #695
erikrocks
HBT_SUPPORTER.png
 
erikrocks's Avatar
Recipes 
 
Jun 2009
Ithaca, NY
Posts: 595
Liked 18 Times on 15 Posts


Quote:
Originally Posted by Lennie View Post
I believe you get rid of the first dump since it is primarily trub and dead yeast, then keep and wash the second and third dumps.
Cool--that's what I figured.

On another note...Has anyone seen the new spunding valve Brewhemoth is offering?

So, correct me if I'm wrong, but this takes the place of the Pressurizer, right? I could do pressurized transfers to a corny AND I could pressurize during fermentation by "dialing in" what I need?

 
Reply With Quote
Old 05-16-2012, 11:40 AM   #696
Lennie
Recipes 
 
Dec 2008
Hannibal, MO
Posts: 584
Liked 13 Times on 12 Posts


Yes you are correct.

I have the same adjustable valve on one of my spunding valves, it seems more robust than the plastic one on my other unit. It goes to 100psi so you are mostly working on the low end, and as you can see it has markings to estimate the pressure you want to set which is nice.

 
Reply With Quote
Old 05-16-2012, 11:51 AM   #697
erikrocks
HBT_SUPPORTER.png
 
erikrocks's Avatar
Recipes 
 
Jun 2009
Ithaca, NY
Posts: 595
Liked 18 Times on 15 Posts


Great. Seems like a pretty good deal for everything all together. Thanks.

 
Reply With Quote
Old 05-16-2012, 12:01 PM   #698
Lennie
Recipes 
 
Dec 2008
Hannibal, MO
Posts: 584
Liked 13 Times on 12 Posts


Yes it does look handy. My spunding valve is built on some heavy tubing and it attaches to the keg QD on the pressurizer. Every once in awhile I have an issue with the spunding valve leaking around one of the connections at the tubing. You shouldn't have that problem with this unit.

 
Reply With Quote
Old 05-16-2012, 08:21 PM   #699
daufdi
Recipes 
 
May 2008
Posts: 33

I wonder what the poppet valve is pushing against to keep it closed? It looks like it is just welded to the tee. I thought about adding a gas fitting to my spunding, but the poppet just pushes through when pressed in. On a corny keg, the poppet pushes against the dip tube.

 
Reply With Quote
Old 05-16-2012, 10:51 PM   #700
Lennie
Recipes 
 
Dec 2008
Hannibal, MO
Posts: 584
Liked 13 Times on 12 Posts


The piece they weld to is solid and they cut a small hole in it that is smaller in diameter than the poppet. I believe this means you can't easily replace the poppet. You could drill out the hole to make it big enough for the poppet to pass through. Then you'd have to solder something back over part of the hole to hold the new poppet.

But a poppet lasts for years so I suppose its something of a moot issue.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
MoreBeer Conicals zymurgy101 Equipment/Sanitation 13 07-04-2011 05:49 PM
Chinese conicals Styles Equipment/Sanitation 23 09-28-2009 01:49 AM
Usage of conicals billtzk Equipment/Sanitation 19 11-27-2008 03:25 AM
Conicals Kayos Equipment/Sanitation 10 02-07-2008 08:31 PM
Using conicals- MikeFlynn74 Equipment/Sanitation 6 12-01-2007 11:36 AM


Forum Jump