Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Brewhemoth conicals?
Reply
 
Thread Tools
Old 09-14-2011, 07:23 PM   #441
nostalgia
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Location: Port Murray, NJ
Posts: 2,408
Liked 70 Times on 48 Posts
Likes Given: 9

Default

I would think 3/8" studs should be plenty for 20 gallons - that's what, only 167 lbs? As long as the welds on the studs are good, I would trust one 3/8" bolt with my body weight. Hell I've done it plenty of times rock climbing with far less than a weld separating me from a fast fall and short stop

I'm considering sanitizing my Brewhemoth with boiling water before filling with wort. I've got an electric HLT and always have spare hot water left over that I could push to boiling and pump into the fermenter via a spray ball. It'd lose some heat during the pumping and spraying, but I believe it would still be well above flash pasteurization temps, which would kill anything in the weld nooks and crannies.

I'll have to run it with the thermowell in and see how hot things get.

-Joe


__________________
I'm opening a brewery! Man Skirt Brewing

Progress is always up on my Facebook page
nostalgia is offline
 
Reply With Quote
Old 09-14-2011, 10:24 PM   #442
DaleP
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Webster Groves, Missouri
Posts: 146
Liked 9 Times on 9 Posts
Likes Given: 7

Default

I soak mine in Wally Worlds version of Oxyclean for a few hours while brewing. A splash of Starsan before filling is all I do. Have between 20 and 30 batches in mine, #2 prototype, have had no problems!


DaleP is offline
 
Reply With Quote
Old 09-14-2011, 11:17 PM   #443
Bruwsomtin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Shippenville, PA
Posts: 115
Liked 1 Times on 1 Posts

Default

would you agree that the brewhemoth is a non-sanitary unit due to the unpolished welds? Also is it worth the extra $590.00 for the weldless fermentator by Blichmann. Looks like the fermentator is a heck of alot easier to clean also as you can acces the entire inside. Just wondering as i am looking into purchasing a conical.
Bruwsomtin is offline
 
Reply With Quote
Old 09-15-2011, 12:16 AM   #444
BigJerk
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
BigJerk's Avatar
Recipes 
 
Join Date: Dec 2009
Location: Seattle, Lynnwood, WA
Posts: 341
Liked 11 Times on 4 Posts
Likes Given: 1

Default

I've had no issue with mine. I have no problems with the welds personally. If you're super paranoid you could put boiling water in it and seal it up and let the heat and steam do it's thing. It shouldn't take a whole lot to heat the unit enough to sterilize it.
BigJerk is offline
 
Reply With Quote
Old 09-15-2011, 12:33 AM   #445
mwhc22
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
mwhc22's Avatar
Recipes 
 
Join Date: Sep 2006
Location: Wisconsin/Utah
Posts: 241
Default

Quote:
Originally Posted by Bruwsomtin View Post
would you agree that the brewhemoth is a non-sanitary unit due to the unpolished welds? Also is it worth the extra $590.00 for the weldless fermentator by Blichmann. Looks like the fermentator is a heck of alot easier to clean also as you can acces the entire inside. Just wondering as i am looking into purchasing a conical.
i am not exactly a master at sanitized containment or anything... but i would say the polishing does nothing other than may it look nice and make clean up a little faster. as long as the welds are not pitted and have holes and gaps to harbor bacteria...then it should be sanitary as is since its 100% stainless, including the rod they used in the welds. i have seen the insides of a few brewery tanks and their welds are not exactly polished clean either... the inside of a corny keg is not exactly polished smooth and we all use those as well.

that being said... at some point i will get to polishing mine with a dremel just because i want it to be smooth... but i am not worried about the sanitaryness of it.

blichmann does fine job of doing a mega polish job and making their welds disappear... that being said... a 20 gal blichman costs twice as much as a brewhemoth... so there is always that to think about as well. if you have cash to waste anything goes really and you can pick and choose. after dropping $350 on triclover parts, valves, and extras for fun... my hemoth and more parts than i need still came in under $1000 including the chiller unit as well.
__________________
“It has been long recognized that the problems with alcohol relate not to the use of a bad thing,
but to the abuse of a good thing." -Abe Lincoln


“Here’s to a long life and a merry one,
a quick death and an easy one, a pretty girl and a true one,
a cold beer and another one." -Lewis Henry


"old schlitz...new schlitz... both getz you LITZ!"
mwhc22 is offline
 
Reply With Quote
Old 09-15-2011, 01:15 AM   #446
wedge421
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
wedge421's Avatar
Recipes 
 
Join Date: Jan 2008
Location: Harrisburg, PA
Posts: 958
Liked 12 Times on 11 Posts
Likes Given: 2

Default

I use the Blichamnn fermenator as a primary vessel and a Brewhemoth as a green tank more or less and they both do their jobs amazingly well. For the money the Brewhemoth is tough to beat. I use Penrose kettles for my boil kettle and HLT and they are both top notch as well
__________________
The Best Homebrew and Beer Review VIDEOS on the internets:
http://www.youtube.com/user/BeerGeekNation
Buy Beer Geek Nation shirts - http://www.beergeeknation.com/store
wedge421 is offline
 
Reply With Quote
Old 09-15-2011, 01:40 AM   #447
StMarcos
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Location: Sebastopol, CA
Posts: 969
Liked 31 Times on 26 Posts
Likes Given: 1

Default

I'm happy with mine. I agree that they should have polished the interior welds though.
StMarcos is offline
 
Reply With Quote
Old 09-15-2011, 11:41 AM   #448
Bruwsomtin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Shippenville, PA
Posts: 115
Liked 1 Times on 1 Posts

Default

Are the welds actualy rough to the touch or are they just discolored? Most tig welded applicatons produce a pretty smooth bead before even polishing. By the looks of the pictures on their website, the welds just appear to still have heat discoloration from the welding process. That can be taken care of with some bar keepers freind (oxalic acid). If the welds have a nice wavy,nonporous,burless appearance to them i would be fine with that.
Bruwsomtin is offline
 
Reply With Quote
Old 09-15-2011, 04:56 PM   #449
Yambor44
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Yambor44's Avatar
Recipes 
 
Join Date: Nov 2008
Location: Ocala Florida
Posts: 1,992
Liked 51 Times on 35 Posts
Likes Given: 8

Default

Quote:
Originally Posted by wedge421 View Post
I use the Blichamnn fermenator as a primary vessel and a Brewhemoth as a green tank more or less and they both do their jobs amazingly well. For the money the Brewhemoth is tough to beat. I use Penrose kettles for my boil kettle and HLT and they are both top notch as well
What is a green tank?
Yambor44 is offline
 
Reply With Quote
Old 09-15-2011, 05:54 PM   #450
dstar26t
If it's worth doing, it's worth overdoing
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Location: Ridley Park, PA
Posts: 1,247
Liked 35 Times on 33 Posts

Default

I would assume same as a Brite tank.


__________________
Next: No idea
Fermenting: Oktoberfestbier, Kolsch, Homegrown Hop IPA 2015, Doppelbock, Egregious-ish, Barrel Fermented Dreg DelcoLambic, Sacch Trois Helles
Drinking: Oat & Conan DIPA, RIS, Carrot Blossom Cedar Mead, Dusseldorf Altbier, Cider, Rye Berliner Weisse, Sauerkraut Fermented Gose, Gueuze, Brett Blonde, Kriek, Saison, Sour Blonde
Barrel aged: RIS, Rye Barleywine, Tripel, Wee-Heavy
dstar26t is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
MoreBeer Conicals zymurgy101 Equipment/Sanitation 13 07-04-2011 05:49 PM
Chinese conicals Styles Equipment/Sanitation 23 09-28-2009 01:49 AM
Usage of conicals billtzk Equipment/Sanitation 19 11-27-2008 03:25 AM
Conicals Kayos Equipment/Sanitation 10 02-07-2008 08:31 PM
Using conicals- MikeFlynn74 Equipment/Sanitation 6 12-01-2007 11:36 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS