Dispensing question... - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Dispensing question...

Thread Tools
Old 12-10-2010, 10:49 AM   #1
Oct 2010
Tyler, TX
Posts: 183
Liked 5 Times on 5 Posts

After force carbing at ~13 psi, I now serve at a much lower pressure. Should I keep the regulator at serving pressure or will I lose carbonation?

Reply With Quote
Old 12-10-2010, 11:27 AM   #2
Senior Member
Hammy71's Avatar
Sep 2008
, Maryland, The Tax Me State
Posts: 5,889
Liked 529 Times on 402 Posts

Your beer will loose carbonation as you dispense. Many of us use 10 foot of 3/16" beer line to create resistance in the line. This allows you to keep the keg at the pressure you want and still be able to pour beer that isn't a glass of foam. A short term solution would be to serve at the lower psi and than return to the higher pressure when your not drinking it.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
keg dispensing question puckjer Bottling/Kegging 8 10-14-2010 02:13 PM
dispensing question beerloin Bottling/Kegging 2 02-25-2010 06:02 PM
Keg Dispensing Question Pash91 Bottling/Kegging 17 01-15-2010 08:49 PM
Keg dispensing question JBrady Bottling/Kegging 2 09-03-2008 04:17 AM
Dispensing Question . . . Keg Sucks back Beer hellbender Bottling/Kegging 3 09-02-2008 04:00 PM

Forum Jump