so I'll use this thread to document my keezer build process, but before begin I have a few questions.
I have this Magic Chef Keezer I scored at a garage sale for $50 I had not purchased it for a keezer build, but I have and its going to turn into one.
I plan on painting it black, and using granite tiles on the top and sides, it will have two 3" Perlick towers with dual faucets.
here is where I need some help or opinions
Collar: 1x8 so I can have 2 cornys on the hump even though I'll only have 4 taps or go with a smaller say 2" or 4" collar to attach my granite tile to.
I will not be using the stock lid as I do not want to cut into it so I planned on using 3/4" plywood, with cement board on top to attach tiles to unless I don't need the cement board.
or no collar just layer 3/4" plywood and 3/4" cement board use a 1x1 along the lower outter edge to attach my granite tiles to. I think the tiles are large enough to overhang around all 4 sides or at least the front 3 sides.
here is kind of a rough vision of how its going to look.
my ghetto MsPaint version of the finished product.
sorry I'm at work and don't have Photoshop like at home.
opinions and criticism welcome