Varying OG Readings from a Refractometer - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Varying OG Readings from a Refractometer

Reply
 
Thread Tools
Old 11-29-2010, 04:06 AM   #1
wendelgee2
Recipes 
 
Dec 2008
New York, NY
Posts: 324
Liked 3 Times on 2 Posts



Hey folks,
Just brewed up an AG batch and had a weird experience.

At the end of the boil I grabbed a little sample for an OG test with the itty-bitty turkey baster/pipette thing that came with my refractometer. I set the sample aside for a while until the wort was cool and on its way into the fermentor. I then checked the sample, and it was low. Shockingly low - 1.062 when I was going for 1.081. At this point, the wort is almost completely into the fermenter, so it's a little late for a hydrometer reading.

So I clean off the refractometer and put in some water to see if it was properly calibrated. It reads 1.000.

I then pull off a bit of whatever wort is leftover in the kettle. Let it sit in a glass and separate (it's the full of break and hops, of course). When it does, it now reads 1.072.

That's better, but still off. Mostly, I'm confused as to why the refractometer would give different readings on different samples. This particular model is supposed to account for temp...but maybe not.

Maybe it's time to just go back to the trusty hydrometer...

 
Reply With Quote
Old 11-29-2010, 06:18 AM   #2
BrewNinja1
Recipes 
 
Jan 2010
Cross Plains, WI
Posts: 326
Liked 5 Times on 5 Posts


Its because your wort will stratify. You need to mix it up, then take the sample right away. I just use my plastic mash paddle. I give it a big stir, then take a drip or two off of the end. I have found the ATC only semi-works. On my refractometer it reads .5 brix lower when its hot.

 
Reply With Quote
Old 11-29-2010, 06:57 PM   #3
wendelgee2
Recipes 
 
Dec 2008
New York, NY
Posts: 324
Liked 3 Times on 2 Posts


Quote:
Originally Posted by BrewNinja1 View Post
Its because your wort will stratify. You need to mix it up, then take the sample right away. I just use my plastic mash paddle. I give it a big stir, then take a drip or two off of the end. I have found the ATC only semi-works. On my refractometer it reads .5 brix lower when its hot.
That makes sense...I'm just surprised by the amount it differed. Clearly you're right, though.

(Also, did calculations for a 5gal batch, not 5.5, which is why I missed by gravity so badly.)

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Refractometer jlmcgrath Equipment/Sanitation 10 09-07-2010 04:33 PM
Confused about recent refractometer readings pretzelb Equipment/Sanitation 21 03-01-2010 04:09 AM
Pipette Sanitation for Refractometer Readings hafmpty Equipment/Sanitation 3 02-24-2010 06:47 AM
Refractometer briewer2 Equipment/Sanitation 2 12-09-2009 04:43 PM
Refractometer Help....? HOP-HEAD Equipment/Sanitation 4 03-02-2009 04:52 AM


Forum Jump