Simple Electricity Design - 1 Element - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Electric Brewing > Simple Electricity Design - 1 Element

Reply
 
Thread Tools
Old 11-27-2010, 09:39 PM   #1
Martin2D
Recipes 
 
May 2009
Absecon, NJ
Posts: 112
Liked 1 Times on 1 Posts



Hey all,

I'm obviously not an electrician, but I through this design together drawing from one of the current threads on here. Just wanted to make sure everything was safe and that I wouldn't kill anyone. If someone could just give me the okay, it'd be greatly appreciated or let me know if I need to make any changes.



I plan on using the Auber 40 amp SSR/heat sink, Auber PID, and Auber 2 pole 240V 40 amp contactor.

For switches I plan to use:
PUMP
http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053
and ELEMENT/CONTACTOR
http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053

Thanks HBT!

 
Reply With Quote
Old 11-27-2010, 11:18 PM   #2
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_ADMIN.png
 
passedpawn's Avatar
Recipes 
 
Apr 2009
☼ Clearwater, FL ☼
Posts: 25,865
Liked 6697 Times on 3960 Posts


Woah, what CAD program do you use? I likes!

Anyway, looks fine (honestly, I just skimmed it, but I see what you are doing and it looks normal). You could get rid of the contactor and one switch with this 2-pole switch, from HD.

__________________
- Andrew

 
Reply With Quote
Old 11-28-2010, 01:21 AM   #3
Martin2D
Recipes 
 
May 2009
Absecon, NJ
Posts: 112
Liked 1 Times on 1 Posts


Thanks for the tip.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heating element questions Patirck Electric Brewing 36 04-20-2012 12:18 PM
What does your element look like? dboblitt Electric Brewing 4 01-10-2012 04:08 PM
208 volt element Budzu Electric Brewing 14 11-06-2010 02:19 AM
Where did you get your heating element? CircleC-Brewer Electric Brewing 20 10-29-2010 02:26 PM
Did I just ruin my element? dboblitt Electric Brewing 3 10-11-2010 06:02 PM


Forum Jump