loose connection out of keg - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > loose connection out of keg

Thread Tools
Old 11-21-2010, 04:38 AM   #1
Jan 2009
San Francisco, CA
Posts: 94
Liked 3 Times on 3 Posts

Ive finally got my draft system pretty much working, but one of the beers isn't coming out right. when I pull the tap the beer comes out in weird halty bursts, (like when there's air in your house plumbing). So I goofed around with it a bit and it seems that the connection for my beer out is loose. When I press it the beer comes out fine. So how do I make that connection tighter?
Any help would be awesome.

Reply With Quote
Old 11-21-2010, 04:56 AM   #2
Mar 2010
levittown, pa
Posts: 137
Liked 1 Times on 1 Posts

i am not sure where the leak is. Is the black quick disconnect loose or is it the post that you put the quick disconnect on??
Originally Posted by knightbeer39 View Post
But follow that up with a good donkey sniffing and WAPOW, you're really hammered! :)
Originally Posted by JBmadtown View Post
If we were perfect the first time it wouldn't be much of a hobby now would it?

Reply With Quote
Old 11-21-2010, 02:35 PM   #3
birvine's Avatar
Oct 2010
Cochrane, Ontario, CANADA
Posts: 1,506
Liked 12 Times on 12 Posts

I had a problem where the beer hose met the barb. I just made sure that I tightened the hose clamp REALLY hard. And make sure you did not use any type of sealing tape on the barb.


Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pin lock with a loose pin finley Bottling/Kegging 0 11-10-2010 03:28 PM
Keg connection? Ryanh1801 Bottling/Kegging 18 08-12-2008 04:09 PM
Help before I loose an eye! AnOldUR Bottling/Kegging 9 09-10-2007 07:29 PM
Loose Lid woosterhoot Bottling/Kegging 0 08-26-2007 11:16 PM
Loose Caps Nashbrew Bottling/Kegging 4 12-08-2005 10:19 PM

Forum Jump