Type of wire for 5500w 240v element - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Electric Brewing > Type of wire for 5500w 240v element

Reply
 
Thread Tools
Old 11-20-2010, 02:28 AM   #1
thomashp
HBT_LIFETIMESUPPORTER.png
Recipes 
 
May 2008
Richmond, VA, Richmond, VA
Posts: 55


By my calculations, a 5500W element at 240V will draw 23 amps or so at full load. That says I need some 10AWG wire. What kind of wire are you guys using? I'm thinking about just buying a nice 10 gauge extension cord and cutting it up. Is there some nicer rubber coated wire I should be using?

 
Reply With Quote
Old 11-20-2010, 02:37 AM   #2
Malticulous
 
Malticulous's Avatar
Recipes 
 
Aug 2008
St. George Utah
Posts: 4,146
Liked 72 Times on 57 Posts


23 Amps, 10 AWG. 8 is over kill, unless the run is long (80ft+.)
__________________
Everything is better with a beer.

 
Reply With Quote
Old 11-20-2010, 02:50 AM   #3
Malticulous
 
Malticulous's Avatar
Recipes 
 
Aug 2008
St. George Utah
Posts: 4,146
Liked 72 Times on 57 Posts


I just did my first PV system.

http://www.facebook.com/album.php?ai...7&l=af242de75d

I think I'll keep my scrap #10 XLP PV WIRE -40c 90C wet or dry sunlight resistant scap wire. It's the best there is.
__________________
Everything is better with a beer.

 
Reply With Quote
Old 11-20-2010, 03:14 AM   #4
Ohio-Ed
HBT_LIFETIMESUPPORTER.png
 
Ohio-Ed's Avatar
Recipes 
 
Nov 2008
Posts: 2,067
Liked 20 Times on 19 Posts


You should be able to get 10awg so/sow cord from lowes or home depot.

 
Reply With Quote
Old 11-20-2010, 07:33 AM   #5
Quaffer
Recipes 
 
Dec 2008
Snohomish, WA
Posts: 418
Liked 29 Times on 15 Posts


Quote:
Originally Posted by thomashp View Post
By my calculations, a 5500W element at 240V will draw 23 amps or so at full load. That says I need some 10AWG wire. What kind of wire are you guys using? I'm thinking about just buying a nice 10 gauge extension cord and cutting it up. Is there some nicer rubber coated wire I should be using?
You have all your numbers right. Well done.
The cable type depends on what you are doing. If this is an equipment cord (attaching to your element) you will need a rubber cord, like SJ or S. It may be called something like 10/3 SJOOW for example. If it is the cable feeding your outlet you can't use rubber. Here you'll need UF for example. The guys at HD or Lowes will know which type you need, most of the time anyway.
__________________
Alcohol, the source of - and solution to - all of life’s problems. H.J.S.
My keezer, My E-brewery build thread, How I soldered 1" nut for heater

 
Reply With Quote
Old 12-04-2010, 11:13 PM   #6
kal
HBT_SUPPORTER.png
 
kal's Avatar
Recipes 
 
Nov 2006
Ottawa, Canada
Posts: 2,519
Liked 349 Times on 224 Posts


For each kettle I use 10 feet of Carol brand 10/3 wire (10 gauge, 3 wires), 300V, oil/water resistant, rubber coating, rated for outdoor use:



Available at Home Depot.

I then purdy it up a bit with some heat shrink tubing, and expandable sleeving:



Kal

 
Reply With Quote
Old 12-04-2010, 11:21 PM   #7
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_ADMIN.png
 
passedpawn's Avatar
Recipes 
 
Apr 2009
☼ Clearwater, FL ☼
Posts: 26,075
Liked 6807 Times on 4023 Posts


Quote:
Originally Posted by kal View Post
For each kettle I use 10 feet of Carol brand 10/3 wire (10 gauge, 3 wires), 300V, oil/water resistant, rubber coating, rated for outdoor use:



Available at Home Depot.

I then purdy it up a bit with some heat shrink tubing, and expandable sleeving:



Kal
That is purdy, but IME nothing stays that purdy. I try to keep the equipment shiny (i.e., polished kegs), but use and age take their toll, and in the end you have to choose between utility and brew-fashion.

To quote our American poet laureate, Robert Frost:
Nature's first green is gold,
Her hardest hue to hold.
Her early leaf's a flower;
But only so an hour.
Then leaf subsides to leaf.
So Eden sank to grief,
So dawn goes down to day.
Nothing gold can stay.
__________________
- Andrew

 
Reply With Quote
Old 12-04-2010, 11:24 PM   #8
kal
HBT_SUPPORTER.png
 
kal's Avatar
Recipes 
 
Nov 2006
Ottawa, Canada
Posts: 2,519
Liked 349 Times on 224 Posts


I dunno, after almost 2 years of using it and dozens of brews, the wires, covers, boxes all look the same! The inside of the brew kettle's a bit tarnished (as expected) but mostly because I don't scrub it completely until it looks like new after each brew. I only use water and elbow grease. Then about once a year I recirculate hot PWB or oxyclean through it to give it a really good shine.

Kal

 
Reply With Quote
Old 12-04-2010, 11:27 PM   #9
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_ADMIN.png
 
passedpawn's Avatar
Recipes 
 
Apr 2009
☼ Clearwater, FL ☼
Posts: 26,075
Liked 6807 Times on 4023 Posts


Quote:
Originally Posted by kal View Post
I dunno, after almost 2 years of using it and dozens of brews, the wires, covers, boxes all look the same!

Kal
My cords stay filthy, even after hosing. That cord sheath looks like it would trap a lot of grime, but I'd give it try. mcmaster?
__________________
- Andrew

 
Reply With Quote
Old 12-04-2010, 11:30 PM   #10
kal
HBT_SUPPORTER.png
 
kal's Avatar
Recipes 
 
Nov 2006
Ottawa, Canada
Posts: 2,519
Liked 349 Times on 224 Posts


Quote:
Originally Posted by passedpawn View Post
My cords stay filthy, even after hosing. That cord sheath looks like it would trap a lot of grime, but I'd give it try. mcmaster?
eBay. If you spill something on them it would most certainly be hard to clean. I've never spilt anything on them

When I clean my boil kettle I simply tilt it sideways into the sink and use the pre-rinse washing arm to scrub it clean. I don't clean the outside.

Kal

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
What does your element look like? dboblitt Electric Brewing 4 01-10-2012 04:08 PM
2 Pole GFCI Breaker With 4 Wire Cord? ScubaSteve Electric Brewing 8 02-08-2011 07:37 PM
208 volt element Budzu Electric Brewing 14 11-06-2010 02:19 AM
Where did you get your heating element? CircleC-Brewer Electric Brewing 20 10-29-2010 02:26 PM
Did I just ruin my element? dboblitt Electric Brewing 3 10-11-2010 06:02 PM


Forum Jump