Thinking I was being clever I mounted my new March Pump on the underside of a bracket. Plumbed it in, turned the switch and no water. What the deuce!
No problem I think just air bubbles. So I open some valves to give her a burp and slowly I start making water out the other end. All's good, I call the wife and kids to show them what their leader has created.
Along comes the big test, brew day. The new 100k BTU burner is roaring the gauges are sweeping upward towards 212F, cold beer in hand (dah!), hit the switch to release the hounds.......not freakin water!!!! No problem I thinks just flip some valve a burp it. Hmmm, not working????
So I thinks to myself, self, what a dumb shhit you are, your pump is cavitating. What did you do wrong? So I go to bed and toss and turn all night thinking about why my new "simplified process took me 6 hours to make beer".
Restless sleep is a wonderful physiological mechanism. Morning comes and the answer is clear. The pump is upside down, therefore the pump cavity is above the inlet and out. Even though the water level in the HLT is higher, there is still an isolated high spot for an air bubble to live. So out comes the butane torch and another trip down to Home Depot for more 5/8 copper tubing.
The moral is mount the pump feet down and use unions so you can remove it when it finally gives up the ghost.
Saving my prostate 1IBU at time
Sipping Silicon for strong teeth and bones