5 Gallon Glass Carboy as Primary? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > 5 Gallon Glass Carboy as Primary?

Reply
 
Thread Tools
Old 11-16-2010, 08:54 PM   #1
dgoldb1
Recipes 
 
Jan 2007
Baltimore, MD
Posts: 380
Liked 2 Times on 2 Posts



I have two 5 gallon glass carboys and two 6.5 plastic buckets. Is the 5 gallon too small to use as a primary? Is there an issue with using the 6.5 gallon plastic fermenter for a 21 day primary fermentation?



 
Reply With Quote
Old 11-16-2010, 09:07 PM   #2

I use plastic for all primary. There's absolutely nothing wrong with it. Also, all of my beers are in the primary fermentor for at least 3-4 weeks depending on style. I've never had an issue and I probably never will.

A 5 gallon glass carboy is too small for a 5 gallon batch. I usually like to allow a gallon of head space when I'm using an airlock, and 1/2 gallon when I'm using a blow off tube. Even with 1/2 gallon of headspace, you'll have a lot of blow off material. If you do a 4.5 gallon batch and use a blow off tube, it'll work if you monitor it closely.


__________________
He who drinks beer sleeps well. He who sleeps well cannot sin. He who does not sin goes to heaven.

Another HERMS rig...

 
Reply With Quote
Old 11-16-2010, 09:17 PM   #3
dgoldb1
Recipes 
 
Jan 2007
Baltimore, MD
Posts: 380
Liked 2 Times on 2 Posts


ok, I'm going to be leaving my beer in the primary for 21 days and then transferring to a 5 gal glass carboy for my secondary so I can dry hop. I guess it will be easier to get my final liquid volume up to 5 gal exactly using the plastic feremter because it has gallon marks on the side of the bucket. Just kind of upset I won't get to see all of the yeast action through the glass.

 
Reply With Quote
Old 11-16-2010, 09:41 PM   #4
AnOldUR
fer-men-TAY-shuhn
HBT_LIFETIMESUPPORTER.png
 
AnOldUR's Avatar
Recipes 
 
Mar 2007
, New Jersey
Posts: 6,886
Liked 844 Times on 609 Posts


Been using 5's as primaries for my last few batches, but with a twist. Transfering 3-1/2 to 4 gallons into two five gallon carboys. If you have the capacity for the standard 5-1/2 (pre-bottle/keg) gallons that most brewers shoot for, you can probably handle the 7+ gallons it takes to do this. If mash or boil size is an issue you can partial mash and top off the carboys.

More beer for the same amount of work is always good!






Edit:
No need to secondary. You can dry hop in your primaries.
Or if you must, use the big bucket and combine the two for dry hopping.

 
Reply With Quote
Old 11-17-2010, 05:09 AM   #5

Quote:
Originally Posted by dgoldb1 View Post
ok, I'm going to be leaving my beer in the primary for 21 days and then transferring to a 5 gal glass carboy for my secondary so I can dry hop. I guess it will be easier to get my final liquid volume up to 5 gal exactly using the plastic feremter because it has gallon marks on the side of the bucket. Just kind of upset I won't get to see all of the yeast action through the glass.
Watch out for those markings on the side of your bucket. They're almost all wrong. You don't know how mad I was when I found out I was brewing 4.5 gallon batches because the markings were wrong. I did that for the first year I was homebrewing, then had to go back and re-work all my notes. I'd make your own markings on the buckets just to be sure.
__________________
He who drinks beer sleeps well. He who sleeps well cannot sin. He who does not sin goes to heaven.

Another HERMS rig...

 
Reply With Quote
Old 11-17-2010, 10:22 AM   #6
rico567
Recipes 
 
Apr 2008
Central IL
Posts: 3,019
Liked 87 Times on 81 Posts


I primary in nothing but 7 gal. plastic buckets. My standard primary duration is 21 days. Great beer, no worries.
__________________
“Malt does more than Milton can / To justify God’s ways to man”

-A. E. Housman (1859–1936). A Shropshire Lad , 1896.

 
Reply With Quote
Old 11-17-2010, 12:59 PM   #7
snowman
Recipes 
 
Sep 2010
Marquette, MI
Posts: 49
Liked 1 Times on 1 Posts


I have used my 5 gal carboy for fermenting, had a bit of foam come up into the airlock so I bought a blowoff tube for next time. Dump 5 1 gal jlugs of water into a carboy or bucket to see where the line should be.... unless you add a bit extra there will always be less than 5 gal of beer unless you don't leave the sediment layer behind.

 
Reply With Quote
Old 11-17-2010, 03:42 PM   #8
2bluewagons
HBT_SUPPORTER.png
 
2bluewagons's Avatar
Recipes 
 
Jan 2009
Taichung, TW / Portland, OR
Posts: 356
Liked 27 Times on 19 Posts


I use 5 gal carboys for primary all the time as I have 3 of them and only 1 7-gal. I usually size the batch appropriately (~4.5 gal) but sometimes still get pretty close to the 5 gal mark. The amount of blowoff will depend on the yeast strain and ferm temp. I've never lost more than a quart os so. Sure, that extra bit of beer (5 gallons pre-packaging) would be nice, but not enough to make me want to invest in larger carboys. Maybe when I start kegging I will change my tune.

Can't comment on buckets as I don't use them for fermenters, but sounds like you're good there based on other replies in here.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
8 gallon primary? eon Fermentation & Yeast 3 09-24-2010 06:24 PM
Carboy and Primary Fermentation dshaggy Fermentation & Yeast 6 03-01-2010 08:42 PM
23 liter carboy primary fermentation Vorsicht709 Fermentation & Yeast 5 12-13-2009 10:07 PM
fermenting 4 gallons in a 6 gallon carboy? irishman646 Fermentation & Yeast 2 11-19-2009 10:31 PM
Need help with primary fermenting in glass carboy. bmickey Fermentation & Yeast 2 09-12-2009 04:07 AM


Forum Jump