Various E-Herms Questions - Page 2 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Electric Brewing > Various E-Herms Questions

Reply
 
Thread Tools
Old 11-16-2010, 04:56 PM   #11
Quaffer
Recipes 
 
Dec 2008
Snohomish, WA
Posts: 418
Liked 29 Times on 15 Posts


Ha! You guys are one step ahead of me. I guess I just type too slowly.
__________________
Alcohol, the source of - and solution to - all of life’s problems. H.J.S.
My keezer, My E-brewery build thread, How I soldered 1" nut for heater

 
Reply With Quote
Old 11-16-2010, 05:01 PM   #12
Scut_Monkey
 
Scut_Monkey's Avatar
Recipes 
 
Jan 2009
Pittsburgh, Pennsylvania
Posts: 2,656
Liked 14 Times on 14 Posts


Quote:
Originally Posted by Boerderij_Kabouter View Post
The backplate of the dryer should list the electricity usage.
I'll take a look at the dryer as well tonight to see if the rating is listed. I don't have a clamp on amp meter otherwise that would work well.

 
Reply With Quote
Old 11-16-2010, 05:25 PM   #13
Quaffer
Recipes 
 
Dec 2008
Snohomish, WA
Posts: 418
Liked 29 Times on 15 Posts


Quote:
Originally Posted by Scut_Monkey View Post
I don't have a clamp on amp meter otherwise that would work well.
I don't either, but now I am thinking I should. Sears has a nice one for under 40 bucks. It would come in handy while building and testing the brewery. One more expense! Where does it end?
__________________
Alcohol, the source of - and solution to - all of life’s problems. H.J.S.
My keezer, My E-brewery build thread, How I soldered 1" nut for heater

 
Reply With Quote
Old 11-16-2010, 06:08 PM   #14
Scut_Monkey
 
Scut_Monkey's Avatar
Recipes 
 
Jan 2009
Pittsburgh, Pennsylvania
Posts: 2,656
Liked 14 Times on 14 Posts


So from my calculations the most I would be pulling with this setup would be 25Amps with the 5500W element at full power and the PID and SSR. This would not allow me to have both the 4500W and 5500W element on at the same time if ever needed. I do not know what type of demand the PID and SSR would have. Anyone know what they typically pull? I figured an amp for both combined which seems like a high estimate to me.

At 25A and a 20% safety margin this would mean I need a breaker of at least 30amps. To go with a 50A or 60A spa panel should be ok from my view with individual circuit protection for each load in the control box.

I'll have to see what the amp draw is for the various electronics in my house to see if this is feasible on what I assume is a 60A service panel. I'll post back on this later tonight.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heating element questions Patirck Electric Brewing 36 04-20-2012 12:18 PM
E-HERMS--What kind of efficiency should I be getting? utopeya Electric Brewing 34 11-11-2010 08:28 PM
Custom Keg Work for HERMS, need advice hatfieldenator Electric Brewing 1 11-03-2010 04:43 PM
Questions for electric herms guys..... wildwest450 Electric Brewing 21 10-22-2010 06:42 PM


Forum Jump