Brett beers on tap? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Brett beers on tap?

Reply
 
Thread Tools
Old 10-26-2010, 04:52 AM   #1
prosper
Recipes 
 
Oct 2009
Edmonton
Posts: 477
Liked 1 Times on 1 Posts



An special considerations to make?

I have a carboy of an orval-esque beer that's been sitting around for 14 months, and I'm not keen to bottle it.

I know some folks are paranoid about brett contaminating their equipment, but I personally can't see how it would survive a good cleaning and star-san flush through the lines after the keg kicks..... right?

 
Reply With Quote
Old 10-26-2010, 05:34 AM   #2

It will infect any plastic it touches. Anything metal can be cleaned. Besides...beer lines are cheap...why risk it?
__________________
He who drinks beer sleeps well. He who sleeps well cannot sin. He who does not sin goes to heaven.

Another HERMS rig...

 
Reply With Quote
Old 10-26-2010, 01:54 PM   #3
dwarven_stout
Recipes 
 
Apr 2009
Boise, ID
Posts: 1,608
Liked 38 Times on 33 Posts


Quote:
Originally Posted by Suthrncomfrt1884 View Post
It will infect any plastic it touches. Anything metal can be cleaned. Besides...beer lines are cheap...why risk it?
It's yeast. Brett is yeast. A proper cycle of oxyclean and starsan will kill it just fine. There is no boogeyman inside this closet.
__________________
"I can't believe how many people think Air Lock is pronounced Hydrometer." -BigKahuna
"If you gave me a beer with placenta in it without telling me I would kick you in the nuts." -ODaniel
"We be in a big hurry for dope beer with much alcamahol and flavor, quality, balance, and aroma don't matter. We just wantz to be druck, u know?" -Yooper

 
Reply With Quote
Old 10-26-2010, 09:13 PM   #4

Yes, brett is yeast. I brewed a lambic a few years ago that I fermented in a plastic bucket. I soaked it in oxyclean for a day before using it again and my next batch got infected. I ended up throwing the bucket out.
__________________
He who drinks beer sleeps well. He who sleeps well cannot sin. He who does not sin goes to heaven.

Another HERMS rig...

 
Reply With Quote
Old 10-26-2010, 10:22 PM   #5
prosper
Recipes 
 
Oct 2009
Edmonton
Posts: 477
Liked 1 Times on 1 Posts


Wow, that's surprising, and scary. Did you sanitize it too, or just use the oxy?

I am somewhat concerned about the lines - there are plenty of nooks and crevasses in the fittings that aren't easily cleaned out, and if any of that pellicle gets in, I could see how it could protect some bugs from contact with sanitizer.

The metal bits are easily disassembled, scrubbed, or boiled but the vinyl is harder to clean.

 
Reply With Quote
Old 10-26-2010, 10:24 PM   #6
prosper
Recipes 
 
Oct 2009
Edmonton
Posts: 477
Liked 1 Times on 1 Posts


or I might not worry about it at all. At kegerator temperatures, I can't see Brett being very active. It takes a long time to make a flavour change under favourable conditions; a miniscule amount kept at very low temps - the keg would probably be empty before anything happened.

 
Reply With Quote
Old 10-26-2010, 10:40 PM   #7
dwarven_stout
Recipes 
 
Apr 2009
Boise, ID
Posts: 1,608
Liked 38 Times on 33 Posts


/shrug

I use the same kegs for Brett and sour beers as normal beer, and the rest of the equipment is the same as well.

I'm just careful to fully disassemble my equipment, wash in hot oxyclean solution, and sanitize with StarSan. I do this with all of my equipment whether it's a sour beer or not. About 25% of what I brew is either sour or funky, and I haven't had a cross-contamination yet. I've had one infection- a mild lacto that happened because I wasn't careful with some added ginger.
__________________
"I can't believe how many people think Air Lock is pronounced Hydrometer." -BigKahuna
"If you gave me a beer with placenta in it without telling me I would kick you in the nuts." -ODaniel
"We be in a big hurry for dope beer with much alcamahol and flavor, quality, balance, and aroma don't matter. We just wantz to be druck, u know?" -Yooper

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
I kegged a brett beer. petep1980 Bottling/Kegging 3 06-29-2010 04:44 PM
Priming method for big beers or long aged beers Matt Up North Bottling/Kegging 2 12-31-2009 07:59 PM
Brett bottling dilemma centralpabrewer Bottling/Kegging 1 06-22-2009 12:32 AM
different beers delweaver Bottling/Kegging 4 09-20-2008 01:33 AM
big beers.... uglygoat Bottling/Kegging 11 06-26-2007 05:01 PM


Forum Jump