I installed the faucets, and used screws to put the secondary regulator and distributer on the collar. The distributer I bought was fairly cheap so it didn't come in a manifold so I used some kind of pipe brackets I found at lowes to attach it to the collar.
Then I reused the freezer hinges and attached the wood collar.
I connected all my gas tubing and put my kegs in the freezer.
I haven't finished the beverage tubing. I'm going out of town for a week so the keezer won't make it's debut until Halloween. I didn't want to let everything sit in the lines for that long.
Tomorrow I'm going to attach a 19inch drip tray I purchased from http://www.barproducts.com
for $24 with shipping.
I'm going to use epoxy to attach brackets to the front of the keezer and then attached the drip tray with velcro to the top of the bracket.