March pumps clogging/ therminator issue - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > March pumps clogging/ therminator issue

Thread Tools
Old 10-15-2010, 05:44 PM   #1
tfrost12's Avatar
Apr 2010
Posts: 47
Liked 1 Times on 1 Posts

I am about to finish my system where I am not moving beer around by hand, to having a pump with QD's and hoses to alleviate all the hand movement of wort and h20. I have had issues when using my therminator when it is gravity fed, during AG batches there's a 1/3 chance it gets clogged and I have to fiddle with it for 10 minutes to unclog it. I am wondering if half the reason is that it cools so quickly the proteins and such are dropping out inside the chiller, or if its just the grain husks and hops that are suspended and coming through the chiller that are clogging it up. The junk at the end of the chill when cleaning seems to be a mix of both things.

My question really boils down to, is this stuff going to clog the march pump if I have that running, or will it help alleviate the chance of clogging inside the therminator since there is a higher pressure. I have also tried a boil screen on the inlet inside the brew kettle, but there was scorching underneath it at one point so I stopped using that.

My other option is to get a pump and a immersion chiller, and stop using the therminator since it becomes such a mess to clean up and a pain to remember to bake it before each brew.

Also in terms of the pump, it should be able to handle the grain husks and first run offs from the mash tun as well, correct?

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
march pumps from pumps for ndoe22 Equipment/Sanitation 15 12-12-2009 07:08 PM
March pumps donshizzles Equipment/Sanitation 7 09-25-2009 02:12 PM
March pumps ThreeDogsNE Equipment/Sanitation 5 08-24-2008 10:21 PM
Preventing Therminator clogging phooka Equipment/Sanitation 4 07-18-2007 02:14 AM
March Pumps Cheesefood Equipment/Sanitation 18 06-21-2007 06:10 PM

Forum Jump