Here's what I got from BillyBrew.com
Fermenting your homebrew at the right temperature is one of the critical factors in making a good brew. Let the temperature get out of whack, and the yeast will punish you.
Since 95% of homebrewed beers are ales, temperature control is usually not an issue. Ales are perfectly fine fermenting at room temperature between 70-75 degrees F. It’s when you use lager yeast that things get tricky. These Eskimos like to work between 50-55F. That’s tough for a homebrewer without specialized equipment.
My latest homebrew is a Kolsch, which uses an unusual blend of ale and lager yeast (White Labs WLP080). It still requires lower temperatures, 65-70F, but that is much more manageable than 50-55F. I aimed for 63-65F because reviews said that the strain works best in that range.
Enter the Swamp Cooler
A swamp cooler is a crude fermentation chamber used to keep lower temperatures. It is usually made out of a cooler, bin, or other large container. The idea is that you put your fermenter into the container with cool water and use ice packs to maintain low temperatures.
As you can see in the picture below, my swamp cooler consisted of:
* Water filled to the beer level
* A plastic tub typically used for holding beer cans or a keg
* A t-shirt (towel can also be used)
* A combination of frozen water bottles, small ice packs (the kind used for ankle sprains), and ice filled Ziploc bags
I kept the shirt wet for the evaporative cooling effect. The picture below shows the inside of my set up:
Swamp Cooler Top View
The goal was to rotate the frozen objects in and out to try to maintain my temperature range between 63-65F. There were 2 main challenges with this:
1. Getting the temperature low enough
2. Consistency and preventing large fluctuations
#2 was my biggest concern. It’s often said that preventing wild temperature fluctuations is more important than the temperature itself. Making it more difficult was the fact that I was out of the house 8-9 hours per day with no Keebler Elves to manage my swamp cooler.
Here are the readings for the first 2 1/2 days. WARNING: DO NOT LET YOUR KIDS LEARN CHARTING FROM THIS P.O.S.! The time axis is not to scale and I mainly took readings on the high side. Still, it is telling…
Swamp Cooler Temperature Chart
At first I was worried that I wouldn’t be able to get the temperature low enough. 2 water bottles brought it down to 66F from room temperature (72F), but it went no lower. Frustrated, I replaced the 2 water bottles with 2 new ones and 2 Ziploc bags.
Oops! 52 degrees! At least I knew it could go low enough…
Once I got the routine down it wasn’t hard to keep the temperature between 60-65F. The beer is 1 1/2 weeks in and I’ve maintained that range the entire time. Not the ideal consistency, but acceptable.
* Once the temperature reached 62F it could be maintained by adding 1 frozen water bottle every 3-4 hours when it hit 65F.
* It was much easier to maintain the temperature in the evenings because I was around the house and could use the small ice packs for minor adjustments. It was overnight and during the day that were trickier, and when I got more fluctuation.
* Many homebrewers recommend aiming a fan directly at the carboy to help with cooling. I tried this and didn’t see any difference. I think it was because my carboy was mostly covered by the tub and only a small bit of air hit the top of it.
If you (or someone else) can be around enough to rotate ice packs, then this is a great way to do cooler fermentations. Just be forewarned that anything in the 50-60F range will require very close attention. I actually think this tub type arrangement is a better strategy for fermenting ales between 65-70F. This is much easier to maintain and will yield cleaner tasting beer (less esters) than one fermented at room temperature or above.
Will I do it again? Damn right.
But I have big plans for upgrading the next one. (Hint: it involves a cooler)
Stay tuned for Swamp Cooler – Part Duex.
Have you tried anything like a swamp cooler to lower your fermentation temperature?