Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > How long of a rest time do I need?
Reply
 
Thread Tools
Old 10-06-2010, 07:23 PM   #1
manoaction
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Fort Collins, Colorado
Posts: 438
Liked 19 Times on 16 Posts
Likes Given: 5

Default How long of a rest time do I need?

I've been unable to hit my FG on my batches (I'm new to AG).

My method is a cooler, with a braid. I put in 1 1/4 quarts to gallons of water at appropriate temp, then sift in crushed grains and stir. I usually hit my temp fine.

I then rest for 60 mins.

After that 60 mins, I crack open my valve and keep the grain bed covered with hot sparge water (175-180). I use a screen that splatters the water to ensure I don't channel.

I continually adjust my valve to draw off two gallons every 10 minutes, and end up with roughly 6.5 gallons after 35 mins.

My OG is usually pretty close to the target, but a couple weeks later my FG stays about 5 points too high, once was even 10 points to high.

I'm new so I don't know if my sparge temp or rest time is doing something to the sugars that won't let them be converted by the yeast.


manoaction is offline
 
Reply With Quote
Old 10-06-2010, 07:26 PM   #2
motobrewer
I'm no atheist scientist, but...
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Oct 2009
Location: Thiensville, Wisconsin
Posts: 7,481
Liked 356 Times on 288 Posts
Likes Given: 484

Default

not time, but temp.

mashing low (148-153) will produce a highly fermentable wort

mashing high (155-159) will produce a not-so-fermentable wort.


motobrewer is offline
 
Reply With Quote
Old 10-06-2010, 08:04 PM   #3
Ludovico
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Calgary
Posts: 83
Default

What temperature are you resting at?
Ludovico is offline
 
Reply With Quote
Old 10-06-2010, 08:16 PM   #4
manoaction
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Fort Collins, Colorado
Posts: 438
Liked 19 Times on 16 Posts
Likes Given: 5

Default

It has depended on the style of beer for the rest temperature.

Usually 155-158 for 60 mins, then I sparge with water at 175-180 for another 30 mins.

Motobrewer, assuming that I'm mashing at 158, is that going to throw my FG off by as much as ten points? I've been following the mash temps of the recipe when it's been given.
manoaction is offline
 
Reply With Quote
Old 10-06-2010, 08:34 PM   #5
kanzimonson
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Charlottesville, VA
Posts: 2,169
Liked 42 Times on 38 Posts
Likes Given: 2

Default

It's no surprise to me that with a mash temp of 158 you're having slightly higher FG readings. Try 152-154 for your next batch.
kanzimonson is offline
 
Reply With Quote
Old 10-06-2010, 09:44 PM   #6
manoaction
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Fort Collins, Colorado
Posts: 438
Liked 19 Times on 16 Posts
Likes Given: 5

Default

I'll definitely try keeping it under 155 for a while and seeing if that makes it all better.

One particularly bad example was my attempt and BierMuncher's OktoberFAST. In the recipe he says to mash at 158 and have a FG of 1.017, but mine was at 1.025. :O

If I keep my temp down to 155 or less, do I need to worry about the fact that it is in water for 90 minutes total?
manoaction is offline
 
Reply With Quote
Old 10-06-2010, 09:53 PM   #7
JonK331
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Fremont, CA
Posts: 2,101
Liked 31 Times on 31 Posts
Likes Given: 6

Default

The purpose of sprinkling the sparge water over the grain bed is not meant to prevent channeling, it is meant to prevent the grain bed from being disturbed. With a braid, you could still be getting some channeling. Also, the crush could be a major factor here. Some HBS crush fairly coarse to prevent their customers from getting stuck sparges, the problem with that is lower efficiency. Check your crush and perhaps try doing it a bit finer. You might also try adding something like S2 to your mash water to ensure your pH is right.


JonK331 is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Long Time Fly Sparger, First Time Batch japhroaig All Grain & Partial Mash Brewing 5 06-29-2010 10:28 PM
Long time in primary Cos All Grain & Partial Mash Brewing 5 03-24-2009 05:42 PM
Really long conversion time? zoebisch01 All Grain & Partial Mash Brewing 10 02-15-2007 02:32 PM
Weizen Beer Mash Rest time ?? EdWort All Grain & Partial Mash Brewing 2 10-07-2006 02:41 AM
time for protein rest in cooler tun Beerdoc All Grain & Partial Mash Brewing 8 03-05-2006 07:40 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS