E-Rig Electrical Enclosures (And a lot more!) - Home Brew Forums

Register Now!
Home Brew Forums > Home Brew Market > For Sale > E-Rig Electrical Enclosures (And a lot more!)

Reply
 
Thread Tools
Old 10-06-2010, 03:28 AM   #1
SweetSounds
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
iTrader: (1)
Liked 20 Times on 19 Posts



I'm resurrecting this thread, all listed and pictured are available at the listed prices.

Full Disclosure: All small Hoffman boxes that were painted blue have been sandblasted back to primer. The big ones are still blue (They don't fit in my blast cabinet!)

I'll start with the enclosures:

(2 available) Hoffman C-SD20208 - $75.00 Each (1 SPF)
Steel 20x20x8 NEMA enclosure - Hinged door w/seal, screwdriver lock, and mounting panel inside. Excellent condition, only one hole in the door! Painted blue.



(1 Available) Hoffman A-1008CHQR - SOLD
Steel 10x8x4 NEMA enclosure - Hinged door w/seal, and mounting panel. Hasp closure. Excellent condition, painted blue.

(1 Available) Hoffman A-1008LP - $25.00
Steel 10x8x4 NEMA enclosure - Non-hinged (Comes off) door w/seal. Screw closure. Excellent condition, painted blue.

__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

Reason: Sales update

 
Reply With Quote
Old 10-06-2010, 03:30 AM   #2
SweetSounds
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
iTrader: (1)
Liked 20 Times on 19 Posts


(3 Available) Unknown - $45.00 Each
Steel 12x18x7 hinged, locking panel (No key! Remove the lock or find a new one) w/9x15.5 perforated mounting panel (These are great - Sheet metal screws go right in for mounting!)


(3 Available) Hubbel HBLDS3 - $40.00 Each
30 Amp Disconnect - Only 1 conduit knocked out on the cases.


(5 Available) IDEC LT1A - $35.00 Each
3-Tier Stack Light (120 Volt lamps and fuse)


(12 Available) IDEC SSU-MR-601/T - $10.00 Each
24v AC/DC trigger, 125vdc 10 amp load SPDT relay module



(2 Available) Allen-Bradley Guardmaster Prosafe key switch - $75.00 Each (I know, but they are $300 new!)
The coolest switch I've ever seen...
Use it to make beer, or launch the nuclear missals
__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

 
Reply With Quote
Old 10-06-2010, 03:30 AM   #3
SweetSounds
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
iTrader: (1)
Liked 20 Times on 19 Posts





I also have a metric crap-ton of Allen-Bradley 31.5mm push-buttons, switches, lights, and E-Stop buttons, as well as DIN rail and DIN mount fuse holders.

If there's anything else you're looking for for your e-rig, shoot me a PM. I've got just about everything I need to build 7 or 8 electric breweries, except for SSRs and elements.

I'm open for full or partial trades, too! - Pt100's, SSRs, PIDs, and especially a BCS or BrewTroller. Roller mill (Bare or built), stir plate/flasks, and pumps (Specifically (2) 220v March pumps, for which I'd partially trade a brand new 110v March 809 )
__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

 
Reply With Quote
Old 10-06-2010, 03:43 AM   #4
Maltose
Recipes 
 
May 2010
Frederick, MD
Posts: 471
iTrader: (0)
Liked 2 Times on 2 Posts


pm sent

 
Reply With Quote
Old 10-06-2010, 04:06 AM   #5
Scut_Monkey
Recipes 
 
Jan 2009
Pittsburgh, Pennsylvania
Posts: 2,656
iTrader: (0)
Liked 14 Times on 14 Posts


PM Sent

 
Reply With Quote
Old 10-06-2010, 01:01 PM   #6
SweetSounds
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
iTrader: (1)
Liked 20 Times on 19 Posts


Quote:
Originally Posted by Scut_Monkey View Post
PM Sent
PM me your zip code so I can get you the proper quote
__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

 
Reply With Quote
Old 10-09-2010, 03:43 PM   #7
SweetSounds
Recipes 
 
Jan 2010
Des Moines, Iowa
Posts: 1,425
iTrader: (1)
Liked 20 Times on 19 Posts


Bump - Scut: Sent the shipping quote for the 20x20x8!
__________________
Quote:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!

 
Reply With Quote
Old 10-10-2010, 03:06 AM   #8
WPStrassburg
Recipes 
 
Sep 2008
Rochester, NY
Posts: 584
iTrader: (2)
Liked 37 Times on 32 Posts


Any picts or prices on the selectors and lights?
Thanks,
Walter

 
Reply With Quote
Old 05-01-2012, 08:48 PM   #9
RTL
Recipes 
 
Mar 2012
Posts: 194
iTrader: (0)
Liked 9 Times on 8 Posts


I'm looking for indicator lights all 120v. I'd like 2 blue 2 yellow 1 red and 1 green or something similar (ie 2grn 2red). I'm also looking for 2 25amp 240volt SSR's. Let me know what you have, thanks.

 
Reply With Quote
Old 05-01-2012, 09:14 PM   #10
Brickout
Recipes 
 
Feb 2010
Lockport, IL
Posts: 268
iTrader: (0)
Liked 31 Times on 11 Posts


Let me know what you have in switches, and E-Stop buttons. I need one E-Stop button and three toggle switches for my E-brewery build.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for electrical help in Austin, TX chrisrush For Sale 4 09-20-2010 08:12 PM
Looking for electrical help in Austin, TX chrisrush For Sale 0 09-20-2010 07:56 PM
for trade very nice Electrical Enclosure CircleC-Brewer For Sale 0 09-04-2010 11:23 PM
Electrical Enclosure for Sale or Trade (denver) RDWHAHB For Sale 3 07-01-2010 04:41 AM


Forum Jump