Computer Controlled Fermentation Chamber - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Computer Controlled Fermentation Chamber

Reply
 
Thread Tools
Old 10-05-2010, 04:13 AM   #1
Hermit
Recipes 
 
Nov 2009
Alternate Universe
Posts: 2,281
Liked 72 Times on 61 Posts



I have computers laying around collecting dust. Seems to me that I could use one to program fermentation schedules. I've seen some usb relay boards but the ones I've seen so far are just on the limits of a compressor. Anyone know of one that would take a 'decent' load or should I just use one of them to drive another relay? I'd also need a suggestion for temperature input.

I want to go heat and cool. I'd like to be able to, for instance, program a Belgian where you typically keep the fermentation down and then let/force it to raise to a specific temp. That and doing a d-rest for a lager and then slowly cooling it down to lager temps.

 
Reply With Quote
Old 10-05-2010, 02:48 PM   #2
mattmauriello
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Apr 2010
Silver Spring MD
Posts: 77
Liked 1 Times on 1 Posts


If i were doing it, I'd use an external relay. why? a board that can handle a compressor is expensive, and if something should go FuBar, you only lose the relay, not the IO board.
i know you said you've seen some boards, but I've been eyeing this guy for a while:
http://www.dontronics-shop.com/top16-usb-io-module.html
not too expensive, and programming looks like it would be a breeze
__________________
I'm not drunk, I'm just exhausted from stayin' up all night drinkin'! -- Peter Griffen

 
Reply With Quote
Old 10-05-2010, 03:28 PM   #3
Hermit
Recipes 
 
Nov 2009
Alternate Universe
Posts: 2,281
Liked 72 Times on 61 Posts


Quote:
Originally Posted by mattmauriello View Post
If i were doing it, I'd use an external relay. why? a board that can handle a compressor is expensive, and if something should go FuBar, you only lose the relay, not the IO board.
i know you said you've seen some boards, but I've been eyeing this guy for a while:
http://www.dontronics-shop.com/top16-usb-io-module.html
not too expensive, and programming looks like it would be a breeze
That one has Linux support which would be a requirement at this point.

EDIT: Doing a little further research it seems Linux should recognize most devices natively and not need and special drivers.

 
Reply With Quote
Old 10-06-2010, 01:06 AM   #4
RiverCityBrewer
 
RiverCityBrewer's Avatar
Recipes 
 
Dec 2009
Cincinnati, OH
Posts: 820
Liked 32 Times on 28 Posts


Linux should be able to recognize the device... it will just be a matter of being able to programatically access it since it looks like the API is developed for windows (.NET). I've seen a few instances of .NET being used in Linux, but not to a great extent and without a bit of pain getting it installed. On the other hand, if you are a talented programmer you could write your own API for Linux based off the DLL they have on their site (and share it with the rest of us!). Good luck either way!

 
Reply With Quote
Old 10-06-2010, 01:22 AM   #5
Hermit
Recipes 
 
Nov 2009
Alternate Universe
Posts: 2,281
Liked 72 Times on 61 Posts


Quote:
Originally Posted by RiverCityBrewer View Post
Linux should be able to recognize the device... it will just be a matter of being able to programatically access it since it looks like the API is developed for windows (.NET). I've seen a few instances of .NET being used in Linux, but not to a great extent and without a bit of pain getting it installed. On the other hand, if you are a talented programmer you could write your own API for Linux based off the DLL they have on their site (and share it with the rest of us!). Good luck either way!
I saw one site that gave some example code. If Linux recognizes the device it may be as simple as #echo >/dev/usbxxx (status). That said, my son is more than 'talented' when it comes to programing. That part will be on him. The friend that started me brewing is an EE and pushing me to look at the Aduino for this.

 
Reply With Quote
Old 10-06-2010, 01:29 AM   #6
RiverCityBrewer
 
RiverCityBrewer's Avatar
Recipes 
 
Dec 2009
Cincinnati, OH
Posts: 820
Liked 32 Times on 28 Posts


I would agree with your friend... while I would love to pickup one of these boards to play with, I would hate to have to spend a ton of effort to get it to work. I would also love to play with the brewtroller but I don't have that kind of time anymore so I went with a BCS.

 
Reply With Quote
Old 10-06-2010, 02:42 AM   #7
kladue
Senior Member
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Dec 2006
Turner, Oregon, Oregon most of the time now
Posts: 2,305
Liked 53 Times on 47 Posts


Here is a USB relay board with higher current ratings http://www.phidgets.com/products.php...roduct_id=1014, also listed are code examples for use with this board. Here is a USB temperature sensor interface board for use with the digital temperature sensors http://www.bipom.com/products/us/2951624.html, add the digital sensors and that should take care of interface hardware. It should not take too long to write an app to do fermentation temperature management, about 20 hours if you do user interface graphics and files for data storage.

 
Reply With Quote
Reply
Thread Tools



Forum Jump